Marantz Continues to Extend this Year’s A/V line-up with New SR6010 and SR7010 Network A/V Receivers

Marantz announces the addition of two new Network A/V receivers with Wi-Fi and Bluetooth®, to its 2015 standard full-size home theater line-up - the SR6010 and SR7010 Premium Network A/V Receivers.

Mahwah NJ September 10, 2015


Marantz, a world leader in advanced audio technologies, announces the addition of two new Network A/V receivers with Wi-Fi and Bluetooth, to its 2015 standard full-size home theater line-up. The SR6010 and SR7010 Premium Network A/V Receivers excel with brilliant home theater and stereo audio performance, paired with the latest in audio and video processing technology, wireless connectivity, and total ease-of-setup and use. The products are expected to be available in October.

SR6010: 7.2-channel Network A/V Receiver ($1,399)

The SR6010 packs an impressive 110 watts of power per channel, to fill even large home theaters with Marantz quality sound. Integrating carefully selected high-grade audio components, the entire internal circuitry further enhances audio quality by delicately handling all signals in a current feedback topology before they reach the speakers. Marantz HDAM (Hyper Dynamic Amplifier Module) technology, shared with Marantz Reference Series components, provides superior, low noise wideband performance in an all-discrete configuration, compared to the conventional op amp integrated circuits found typically in this application. HDAMs provide exceptional signal-to-noise ratio, ultra-fast slew rate, ultra-wideband frequency response, and maximum dynamic range for the most lifelike sound possible. Overall, the SR6010 delivers optimum sound quality with today's high-resolution audio formats.

In terms of audio formats, the SR6010 comes equipped with a groundbreaking Dolby Atmos decoder and Dolby Surround up-mixer. These deliver captivating multi-dimensional sound through height or in-ceiling speakers or Dolby Atmos elevation speakers. On its own, the SR6010 can support a 5.1.2 Atmos configuration. However, thanks to its 9-channel processor, adding an external 2-channel amplifier will facilitate 5.1.4 or 7.1.2 configurations. The Marantz MM7025 is an ideal amplifier to pair with the SR6010. This 140-watt 2-channel power amplifier matches the sonic characteristics of the SR6010 while offering increased power and a separate power supply for the main left and right speakers. The SR6010's internal amplification would power the balance of the system. The SR6010 is ready for DTS:X and the DTS Neural:X up-mixer that can create a more immersive soundfield for the listener no matter how many speakers are installed. For updates and more information about DTS:X please visit http://www.marantz.com/dtsx.

Featured Product

PureLink - HCE III TX/RX: 4K HDR over HDBaseT Extension System w/ Control and Bi-Directional PoE

PureLink - HCE III TX/RX: 4K HDR over HDBaseT Extension System w/ Control and Bi-Directional PoE

The HCE III Tx/Rx HDBaseT™ extension system offers full HDMI 2.0 compliance supporting HDR (High Dynamic Range) and 4K@60Hz with 4:4:4 chroma sampling. Featuring PureLink's proprietary Prcis codec, a light compression technology, the HCE III can transport Ultra HD/4K, multi-channel audio, and High Dynamic Range (10 bits support) content over a single CATx cable. The HCE III provides HDMI extension up to 130 feet (40 meters) at Ultra HD/4K and up to 230 ft. (70 meters) at 1080p over category cable with embedded multi-channel audio, CEC pass-through, bi-directional RS-232 and IR control, and PoE - all with zero loss and zero noise. The HCE III Tx/Rx also supports Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio plus LCPM (up to 192 kHz). Additionally, the low profile "slim box" enclosure design make the HCE III ideal for limited space installation environments, such as behind flat panel displays and video walls.