InfoComm - Platinum Tools® Features New EZ-RJPRO™ Termination Pod at 2015 InfoComm

Complete Field Kit (P/N 90173) Includes EZ-RJPRO HD Crimp Tool, Cat5e/6 Cable Jacket Stripper, Electrician's Scissors, EZ-RJ45® Cat5e Connectors, EZ-RJ45® Cat6 Connectors, and EZ-RJ12/11® Connectors

ORLANDO, Fla., June 17, 2015 - Platinum Tools(R) (www.platinumtools.com), the leader in solutions for the preparation, installation and hand termination of wire and cable, is proud to announce it will feature the new EZ-RJPRO™ Termination Pod, a complete turnkey field kit (P/N 90173), during InfoComm 2015, held in Orlando, Fla. from June 17-19 at the Orange County Convention Center, booth #3779. Now shipping, the EZ-RJPRO Termination Pod has an MSRP of $279.00.


"Our new EZ-RJPRO Termination Pod is designed for the professional installer providing everything he needs for consistent, repeatable terminations and overall quicker and easier installations," explained John Phillips, Platinum Tools, Inc. product manager. "This versatile kit has the right assortment of both tools and connectors making it the perfect solution when working with Cat5e, Cat6, and Cat3, as well. With the EZ-RJPRO Termination Pod, the installer can be assured that every termination will meet FCC specifications".

The "EZ" crimp & trim, modular plug termination kit Includes:
• EZ-RJPRO HD Crimp Tool - P/N 100054
• Cat5e/6 Cable Jacket Stripper - P/N 15015
• Electrician's Scissors - P/N 10517
• EZ-RJ45® Cat5e connectors (100 each) - P/N 105003
• EZ-RJ45® Cat6 connectors (100 each) - P/N 105004
• EZ-RJ12/11 connectors (50 each) - P/N 105005

EZ-RJPRO HD Crimp Tool - P/N 100054
The EZ-RJPRO HD Crimp Tool uses the EZRJ45® patented ‘crimp & trim' system and is designed to handle larger dimensional size cables. Compatible with all EZ-RJ45® and EZ-RJ12/11 connectors as well as all standard modular plugs, except AMP.

Cat5e/6 Cable Jacket Stripper - P/N 15015
This economical tool has been specifically designed to strip the cable jackets from Category 5, 5e, and Category 6 twisted pair cables. No adjustments are required and will not nick the inner conductors. Durable high impact plastic housing is molded from yellow plastic to make it easier to locate. Long life blade.

Electrician's Scissors - P/N 10517
Our Scissor-Run Scissors are an original favorite. This smooth cutting action, scissor-run design, is excellent for cutting Kevlar®, foil, and wire. Cuts wire up to 16 AWG solid, 12 AWG stranded, and will strip 19 AWG and 23 AWG. Includes full serrated bottom blade for non-slip cutting; through hardened, high carbon steel for edge retention; double plated chrome over nickel; easily re-sharpens and holds cutting edge; scraper and file on backside of blades.

EZ-RJ45® Cat5e connectors (100 each) - P/N 105003
The patented EZ-RJ45® Connector simplifies twisted pair terminations by allowing the wires to be inserted through the connector and out the front. This allows the technician to easily verify the proper wiring order. Electrical performance of the termination is optimized by pulling the connector down over the cable jacket and seating it tightly in the rear of the connector. Made in the USA. Patented.

EZ-RJ45® Cat6 connectors (100 each) - P/N 105004
The new patented EZ-RJ45 Cat6 Connector simplifies twisted pair terminations by allowing the wires to be inserted through the connector and out the front. This allows the technician to easily verify the proper wiring order. Electrical performance of the termination is optimized by pulling the connector down over the cable jacket and seating it tightly in the rear of the connector. Made in the USA. Patented.

EZ-RJ12/11® connectors (50 each) - P/N 105005
The new, patented EZ-RJ12/11 Connector simplifies twisted pair terminations by allowing the wires to be inserted through the connector and out the front. This allows the technician to easily verify the proper wiring order prior to termination. Use the EZ-RJPRO HD™ Crimp Tool (P/N 100054) for single cycle crimping and trimming of the excess wire. FCC compliant and UL rated. Made in the USA. Patented.

For more information on Platinum Tools and its complete product line, please visit www.platinumtools.com, call (800) 749-5783, or email info@platinumtools.com.

About Platinum Tools
Platinum Tools, founded in 1997, was created based upon two very simple objectives. First, develop the absolute best possible solutions for the preparation, installation, and hand termination of wire and cable. Second, implement an operational infrastructure that can deliver these products in an efficient, timely, and high quality manner.

All of our products must absolutely satisfy three critical benchmark criteria…utility of function; quality of function; and economic value. Our people are our company. They, too, must be focused on and work to satisfy three critical benchmark criteria…customer satisfaction; product knowledge and expertise; and willingness to learn and adapt.

# # #

Featured Product

MIDLITE®'s SPEEDPORT Universal Cable Pass Thru, Fastening & Anchor System

MIDLITE®'s SPEEDPORT Universal Cable Pass Thru, Fastening & Anchor System

Use for any Low Voltage Cabling, A/V, Telecom, Data, Networking Ideal for : Sound Bars & Wall Speakers • Home Theater Cabling • A/V Furniture The SPEEDPORT™ is incredibly versatile and is ideal for wall mounted box speakers, sound bars and wireless access devices mounted in ceilings. It can accommodate almost any device needed to be hung on a wall or ceiling with cable pass thru and mounting. The ultra low profile design features a rubber grommet insert for bulk cable pass thru. Two mounting screws are hidden behind the grommet and offer a clean, unobtrusive presentation. Installation is quick & simple using a hole saw and attaches to acoustical ceiling tiles and/or gypsum board. Reducing labor and a whole lot of mess from hand cutting large rectangular holes - Low voltage brackets are no longer needed. Just cut your hole in the desired location, insert SPEEDPORT™ and tighten adjustable mounting arms to fasten securely.