NAD Launches CI 980 and CI 940 Multi-Channel Amplifiers

Full-Featured Designs Represent a New Generation of High Performance Amplification for the CI Market

Pickering, Ontario February 16, 2015 - NAD Electronics, the highly regarded manufacturer of high-performance audio/video components, announced two new multi-channel amplifiers primarily designed for distributed audio systems for the custom installation market. The eight-channel CI 980 ($1299) utilizes the latest high efficiency switching amplifier technology resulting in lighter weight, cooler operation, energy savings and improved reliability. The four-channel CI 940 ($799) uses NAD's proven Class AB amplifier design featuring high dynamic power and low impedance drive capability. Both models are in stock and available for immediate delivery.


LLegendary for more than four decades for their award-winning amplifier technology and performance, the company's new CI amplifiers are like all NAD amplifiers in that they are conservatively rated and punch well above their weight. CI 980 features 8 channels conservatively rated at 50 watts per channel with all channels driven into 8 ohms. The multi-channel amp is stable at lower impedances and with long wire runs. Designed to drive four stereo zones, any two channels can be bridged to form one larger channel of 120 watts into 8 ohms. This provides the installer important flexibility in tailoring the CI 980 for a variety of applications.

The CI 940 delivers 35 watts into four channels at 8 Ohms and is the best choice where the highest possible sound quality is desired. Like its larger sibling, two channels can be bridged to form one higher-powered channel delivering two channels of 100 watts each into 8 Ohms. The CI 940 can easily provide the instantaneous peak current required for controlled bass response by utilizing multiple discrete high power output devices. The power supply features very low impedance for lowest noise and good damping factor.

"With the custom installation market making a strong comeback, we felt there was an opportunity for fresh new thinking in high performance, multi-channel amplifiers." Explained Greg Stidsen Direct of Technology and Product Planning for NAD Electronics.

"NAD has deep roots in the custom market and our new CI amps offer excellent reliability, light weight, energy saving and of course great sound. We believe these new amplifiers represent a higher level of performance and value to the quality-oriented CI installer and their clients."

Reliability is paramount for amplifiers utilized for professional installation. Both NAD CI 980 and CI 940 are designed for extreme reliability by being stable into demanding loads and fully protected from short circuits. Thermostatically controlled forced air-cooling prevents overheating and helps provide along-trouble-free life. Cooler operation also allows for using multiple amps in the same location without fear if heat buildup.

Phoenix speaker connection blocks and detachable power cords make installation a snap, and a selectable local or global input further simplifies wiring. Each input has a line input, line output and gain control for presetting maximum zone levels.

Their surprising light weight (CI 980 weighs under 13 lbs.) makes these powerhouse amps easy to handle and install. For further ease of installation, their solid metal chassis comes supplied with 2U ears for rack mounting, if so desired. Easy integration is assured by the choice of DC trigger or signal-sensing auto-on with auto shut-off and half-watt standby.

The light weight and efficient design of the amplifiers also yields an additional benefit in reduced energy usage, something the client will readily appreciate.

Key Features of NAD's CI 980 and CI 940:

* New generation of high performance amplification for CI market

* Light and efficient- utilizes latest high efficiency amplifier switching technology. Amplifiers are remarkably light for their power as well as highly energy efficient

* Amplifiers are "bridgeable" allowing two channels to be combined into one

* Ultra reliable - stable into low impedance loads, fully protected from short circuits, thermostatically controlled forced air cooling to prevent overheating

* Easy to install - 2U rack height comes with rack ears for quick easy rack mounting

About NAD
Founded in 1972 and now sold in over 80 countries, NAD Electronics is renowned for its award-winning line of high quality components for audio, home theater and custom installation applications. The company's products consistently deliver outstanding performance, value and simplicity. With over forty years of innovation and value, NAD products are proudly distributed in the U.S. by Lenbrook America.

Featured Product

MIDLITE®'s SPEEDPORT Universal Cable Pass Thru, Fastening & Anchor System

MIDLITE®'s SPEEDPORT Universal Cable Pass Thru, Fastening & Anchor System

Use for any Low Voltage Cabling, A/V, Telecom, Data, Networking Ideal for : Sound Bars & Wall Speakers • Home Theater Cabling • A/V Furniture The SPEEDPORT™ is incredibly versatile and is ideal for wall mounted box speakers, sound bars and wireless access devices mounted in ceilings. It can accommodate almost any device needed to be hung on a wall or ceiling with cable pass thru and mounting. The ultra low profile design features a rubber grommet insert for bulk cable pass thru. Two mounting screws are hidden behind the grommet and offer a clean, unobtrusive presentation. Installation is quick & simple using a hole saw and attaches to acoustical ceiling tiles and/or gypsum board. Reducing labor and a whole lot of mess from hand cutting large rectangular holes - Low voltage brackets are no longer needed. Just cut your hole in the desired location, insert SPEEDPORT™ and tighten adjustable mounting arms to fasten securely.