Octava -IPC600 Ethernet over coax Extender ,100Mbps Ethernet and PoE over Coax cable

The Octava Ethernet over coax Extender , IPC600, extends 100Mbps Ethernet data over standard coaxial video cable.

Norcross, Ga Jan 15, 2015- Octava Inc., solution provider of video and network infrastructure equipment, releases their new Octava IPC600 Ethernet over Coax Extender.


The Octava IPC600 enables system integrators to upgrade analog video security cameras systems to IP network based cameras which require 10/100Mbps data transmission while utilizing the existing RG59/6 coax cable that is already installed. The IPC600 Ethernet over Coax EoC extender supports 10/100Mbps data and Power Over Ethernet. The IPC600 includes a Network unit (transmitter) and a Receiver (camera side unit) and powered via PoE Ethernet switch. In addition, the IPC600 when connected to a PoE switch or injector can provide power to the connected IP Network Camera using IEEE 802.3af/at standards.
"Upgrading to IP network camera system over existing coax video camera is a huge time saver because there is no need to install new Catx cables. The integrator simply installs the IPC600 units and the IP network camera with minimum disruptions. The IPC600 also has very long transmission capability and exceeds the limits of traditional networking standards over Catx cable"- says Jeffrey Su Product manager at Octava

Featured Product

PureLink - HCE III TX/RX: 4K HDR over HDBaseT Extension System w/ Control and Bi-Directional PoE

PureLink - HCE III TX/RX: 4K HDR over HDBaseT Extension System w/ Control and Bi-Directional PoE

The HCE III Tx/Rx HDBaseT™ extension system offers full HDMI 2.0 compliance supporting HDR (High Dynamic Range) and 4K@60Hz with 4:4:4 chroma sampling. Featuring PureLink's proprietary Prcis codec, a light compression technology, the HCE III can transport Ultra HD/4K, multi-channel audio, and High Dynamic Range (10 bits support) content over a single CATx cable. The HCE III provides HDMI extension up to 130 feet (40 meters) at Ultra HD/4K and up to 230 ft. (70 meters) at 1080p over category cable with embedded multi-channel audio, CEC pass-through, bi-directional RS-232 and IR control, and PoE - all with zero loss and zero noise. The HCE III Tx/Rx also supports Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio plus LCPM (up to 192 kHz). Additionally, the low profile "slim box" enclosure design make the HCE III ideal for limited space installation environments, such as behind flat panel displays and video walls.