Kramer VP-427 Receiver/Scaler Reduces Complexity, Increases Reliability

Two-in-one solution is more cost-effective and offers high quality scaling

Kramer Electronics announced today the release of the VP'427 Receiver/Scaler, a cost'effective two'in'one HDBaseT™ receiver solution with a built'in scaler.

The compact Kramer VP'427 reduces complexity while increasing reliability. The solution also offers a significantly lower price point than standard two'unit solutions. The VP'427 can scale input video to the native resolution of the HDMI receiver or any other resolution (up to 1080p). The unit also supports bidirectional IR and bidirectional RS'232.

The Kramer VP'427 Receiver/Scaler receives an HDBaseT signal through an HDBaseT twisted pair cable and converts it back to HDMI, IR and RS'232. A bidirectional RS'232 port lets users embed and de'embed control commands in the HDBaseT data stream. Infrared input and output ports let users control devices over the HDBaseT data stream. The unit includes embedded audio support.

The Kramer VP'427 up' or down'scales the picture to match the precise resolution of the HDMI monitor. The VP'427 offers ProcAmp control for contrast, brightness and R, G, B level/gain. Setup and adjustment is easy with an on'screen display, accessible via front'panel buttons.
For information about all of Kramer Electronics, Sierra Video, Minicom Digital Signage and Kramer Powered by Calibre products please visit www.kramerus.com.

Featured Product

PureLink - HCE III TX/RX: 4K HDR over HDBaseT Extension System w/ Control and Bi-Directional PoE

PureLink - HCE III TX/RX: 4K HDR over HDBaseT Extension System w/ Control and Bi-Directional PoE

The HCE III Tx/Rx HDBaseT™ extension system offers full HDMI 2.0 compliance supporting HDR (High Dynamic Range) and 4K@60Hz with 4:4:4 chroma sampling. Featuring PureLink's proprietary Prcis codec, a light compression technology, the HCE III can transport Ultra HD/4K, multi-channel audio, and High Dynamic Range (10 bits support) content over a single CATx cable. The HCE III provides HDMI extension up to 130 feet (40 meters) at Ultra HD/4K and up to 230 ft. (70 meters) at 1080p over category cable with embedded multi-channel audio, CEC pass-through, bi-directional RS-232 and IR control, and PoE - all with zero loss and zero noise. The HCE III Tx/Rx also supports Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio plus LCPM (up to 192 kHz). Additionally, the low profile "slim box" enclosure design make the HCE III ideal for limited space installation environments, such as behind flat panel displays and video walls.