Kramer Introduces the VM-4HN HDMI Distribution Amplifier

First in Line of 4K Products

The VM-4HN is a 1:4 HDMI distribution amplifier for HDMI signals. It relocks and equalizes the signal and distributes it to four identical outputs. The VM-4HN, with its maximum data rate of 10.2Gbps (3.4Gbps per graphic channel) distributes signals with resolutions up to Quad HD (38x40x2160), 24hz refresh with 8-bit/10-bit/12-'bit color, and 30 Hz refresh with 8-bit color. It also supports WUXGA (1920x1200) up to 12-bit color, and 1080p at all color bit depths.

The VM-4HN supports Deep Colour, x.v.ColorTM, Lip Sync, HDMI Uncompressed Audio Channels, Dolby TrueHD, DTS-HD, and CEC. It is HDCP compliant and features I-EDIDProTM Kramer Intelligent EDID ProcessingTM, an intelligent EDID handling and processing algorithm that ensures Plug and Play operation for HDMI systems. In addition the default, pre-programmed EDID allows the VM-4HN to be connected quickly and without having to connect a display to the output. The VM-4HN passes 3D.

Housed in a compact DigiTOOLS® enclosure, the VM-4HN comes supplied with a 5v power adapter.

Featured Product

MIDLITE®'s SPEEDPORT Universal Cable Pass Thru, Fastening & Anchor System

MIDLITE®'s SPEEDPORT Universal Cable Pass Thru, Fastening & Anchor System

Use for any Low Voltage Cabling, A/V, Telecom, Data, Networking Ideal for : Sound Bars & Wall Speakers • Home Theater Cabling • A/V Furniture The SPEEDPORT™ is incredibly versatile and is ideal for wall mounted box speakers, sound bars and wireless access devices mounted in ceilings. It can accommodate almost any device needed to be hung on a wall or ceiling with cable pass thru and mounting. The ultra low profile design features a rubber grommet insert for bulk cable pass thru. Two mounting screws are hidden behind the grommet and offer a clean, unobtrusive presentation. Installation is quick & simple using a hole saw and attaches to acoustical ceiling tiles and/or gypsum board. Reducing labor and a whole lot of mess from hand cutting large rectangular holes - Low voltage brackets are no longer needed. Just cut your hole in the desired location, insert SPEEDPORT™ and tighten adjustable mounting arms to fasten securely.