Kramer Introduces the VP-'470 3G HD-SDI Scaler

Optimized for use in Broadcast Applications

Kramer Electronics is pleased to announce the introduction of the VP-470 3G HD-SDI Digital Scaler. The VP-470 is a digital scaler for SDI signals up to 3G HD-SDI resolution. It up or down-scales SD, HD and 3G HD-SDI signals to one of 16 resolutions of up to 1080p @60Hz.

The VP-470 is ideal for use in broadcast applications. The output of the VP-470 can be used to feed a production switcher, edit suite, or router in a television studio. It can takethe feed from a satellite receiver and scale it before it is sent out live over the air. In production, it can scale camera feeds coming in from the field before ingesting the footage into a video server.
The VP-470 has one SDI input and looping output for a local monitor on BNC connectors to accept an SD, HD or 3G SDI signal. Its input automatically detects the incoming signal format. Supported formats include SMPTE standards 259M (SDI), 292M (HD-SDI) and 424 M (3G HD-SDI). The VP-470 simultaneously outputs the scaled signal to two active outputs on BNC connectors.
The VP-470 supports output resolutions of 480i @59.94Hz, 576i @50Hz, 720p @50/59.94/60 Hz, 1080i @50/59.94/60Hz, 1080p @23.98/24/25/29.97/30Hz and 1080p @50/59.94/60Hz.
The VP-470 features a built-in proc amp that can adjust the brightness, contrast, and color of the output signal. These picture can be conveniently adjusted via the on-screen display (OSD) of the VP-470, accessed by the front panel buttons. Also included on the front panel is a button for image freeze. These settings are stored in non-volatile memory that retains the last settings used.
The VP-470 also has selectable output aspect ratio settings of Full (default), 16:9, 16:10, 4:3 or Best Fit and it has the ability to turn over-scan on or off.
The VP-470 features an external 5V DC power source, making it suitable for field operation and it is housed in a compact Kramer MegaTOOLS™ enclosure. The VP-470 is currently in stock and available from Kramer Electronics sales companies around the world.

Featured Product

MIDLITE®'s SPEEDPORT Universal Cable Pass Thru, Fastening & Anchor System

MIDLITE®'s SPEEDPORT Universal Cable Pass Thru, Fastening & Anchor System

Use for any Low Voltage Cabling, A/V, Telecom, Data, Networking Ideal for : Sound Bars & Wall Speakers • Home Theater Cabling • A/V Furniture The SPEEDPORT™ is incredibly versatile and is ideal for wall mounted box speakers, sound bars and wireless access devices mounted in ceilings. It can accommodate almost any device needed to be hung on a wall or ceiling with cable pass thru and mounting. The ultra low profile design features a rubber grommet insert for bulk cable pass thru. Two mounting screws are hidden behind the grommet and offer a clean, unobtrusive presentation. Installation is quick & simple using a hole saw and attaches to acoustical ceiling tiles and/or gypsum board. Reducing labor and a whole lot of mess from hand cutting large rectangular holes - Low voltage brackets are no longer needed. Just cut your hole in the desired location, insert SPEEDPORT™ and tighten adjustable mounting arms to fasten securely.