Crestron to Demonstrate Industry-First End-to-End 4K Matrix Switching and Large-Scale Distribution Solution at ISE 2014

4K DigitalMedia™ upgrades will bring the highest available resolutions to both professional and consumer applications

Rockleigh, NJ, February 4, 2014 ' 4K Ultra HD TV is here and Crestron DigitalMedia is ready. At Integrated Systems Europe 2014 in Amsterdam, February 4 - 6, Crestron will for the first time demonstrate its complete range of 4K DigitalMedia switching and video distribution devices.


"4K displays are quickly establishing a strong foothold in both professional and consumer markets. However, up until now, video distribution technology was not available to transmit 4K content throughout a home or business, to multiple rooms, or over long distances," said Justin Kennington, Technology Manager for DigitalMedia. "When it comes to emerging video distribution technology in the digital arena, once again, Crestron is taking the lead, this time with the first complete 4K solution."

Visitors to the Crestron stand will see live 4K switching from an array of sources to a variety of Crestron 4K Certified displays, using the following new products:

DMC-4K-HD Input Card and DMB-4K-I-HD Input Blade

The DMC-4K-HD input card enables 4K HDMI® input to 8X8, 16X16, and 32X32 DM® switchers, and the DMB-4K-I-HD input blade enables 4K HDMI input to 64X64 and 128X128 DM switchers.

Type 8 Output Cards and DMB-4K-O-C Output Blade

Type 8 Output Cards enable 4K DM output from 8X8, 16X16, and 32X32 DM switchers. The DMB-4K-O-C output blade enables 4K DM output from 64X64 and 128X128 DM switchers. The output can be connected to a DM receiver or directly to any HDBaseT® compliant device.

DM-RMC-4K-100-C Receiver & Room Controller

The DM-RMC-4K-100-C provides a simple one-box interface for a single 4K display device as part of a complete DM system. In addition to lossless audio and 4K video, the DM-RMC-4K-100-C provides Ethernet, RS-232, and IR control ports. Its compact low-profile design enables discreet installation behind a flat panel display or above a ceiling mounted projector.

HD-XSPA 4K Professional AV Receiver

The HD-XSPA brings in 4K video from a matrix switcher through a Crestron DM input port and four local HDMI inputs. With a built-in high-performance 8-channel amplifier, HD-XSPA makes it easy and affordable to include high-quality 7.1 surround sound in a home theater as part of a whole-house AV distribution system. It delivers 140 Watts/Ch. at 8 Ohms, with a dedicated subwoofer channel for powering a passive in-wall subwoofer. It can also provide a two-channel downmix to feed back to a distributed audio system or to two assigned amp channels (leaving 5.1 for surround).

About 4K Ultra HD
At a display resolution up to 4096x2160, 4K Ultra HD TVs provide resolutions that are four times higher than the current standard of full HD 1920x1080, also commonly referred to as 1080p. Just as 720p and then 1080p quickly became high-definition display standards in the last decade, 4K Ultra HD is on its way to becoming the format for television, movies, corporate presentations, and imaging.

Learn more

To learn more about delivering 4K Ultra HD video distribution in today's AV systems, visit Crestron stand 2-C24 at ISE 2014 in Amsterdam, Feb. 4 - 6. Visit www.crestron.com/4K.

Featured Product

PureLink - HCE III TX/RX: 4K HDR over HDBaseT Extension System w/ Control and Bi-Directional PoE

PureLink - HCE III TX/RX: 4K HDR over HDBaseT Extension System w/ Control and Bi-Directional PoE

The HCE III Tx/Rx HDBaseT™ extension system offers full HDMI 2.0 compliance supporting HDR (High Dynamic Range) and 4K@60Hz with 4:4:4 chroma sampling. Featuring PureLink's proprietary Prcis codec, a light compression technology, the HCE III can transport Ultra HD/4K, multi-channel audio, and High Dynamic Range (10 bits support) content over a single CATx cable. The HCE III provides HDMI extension up to 130 feet (40 meters) at Ultra HD/4K and up to 230 ft. (70 meters) at 1080p over category cable with embedded multi-channel audio, CEC pass-through, bi-directional RS-232 and IR control, and PoE - all with zero loss and zero noise. The HCE III Tx/Rx also supports Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio plus LCPM (up to 192 kHz). Additionally, the low profile "slim box" enclosure design make the HCE III ideal for limited space installation environments, such as behind flat panel displays and video walls.