Jackson Systems Introduces New Product Line - BACnet® Thermostats

Combining the power of a space-mounted equipment controller with the convenience of built-in temperature and humidity

INDIANAPOLIS, IN, January 31, 2014 - The JS Series BACnet thermostat from Jackson Systems combines the power of a space-mounted equipment controller with the convenience of built-in temperature and humidity. The thermostats include a wide range of factory supplied programs for the following applications: two-pipe and four-pipe fan coil units, roof top units, heat pump units and packaged and split unitary systems.


The JS Series BACnet thermostat line also offers an independent, BACnet-ready zoning control (JS-Z2400). The JS-Z2400 is a commercial zone control system built on the industry standard BACnet protocol and Tridium platform.This zoning control can be used for multiple zone systems or as a stand-alone solution for isolated heating and cooling problems. This system can control reheat at each zone for additional flexibility.

No special programming, Tridium experience, software applications or setup tools are required to configure and commission a JS Series BACnet thermostat. All options can be set by using only the five front panel buttons and the easy-to-read menus in the full-color display.

The attractive two-piece design is ideal for new installations or upgrades of older, less efficient thermostats. All models are native BACnet, Application Specific Thermostats ready to connect to a BACnet MS/TP network. Device instance, MAC address and baud rate are set from the password protected front controls. All models feature an integrated clock and BACnet schedule that can be setup from the front panel or as standard BACnet objects and properties.

For more information, call us at 888.652.9663.

Featured Product

PureLink - HCE III TX/RX: 4K HDR over HDBaseT Extension System w/ Control and Bi-Directional PoE

PureLink - HCE III TX/RX: 4K HDR over HDBaseT Extension System w/ Control and Bi-Directional PoE

The HCE III Tx/Rx HDBaseT™ extension system offers full HDMI 2.0 compliance supporting HDR (High Dynamic Range) and 4K@60Hz with 4:4:4 chroma sampling. Featuring PureLink's proprietary Prcis codec, a light compression technology, the HCE III can transport Ultra HD/4K, multi-channel audio, and High Dynamic Range (10 bits support) content over a single CATx cable. The HCE III provides HDMI extension up to 130 feet (40 meters) at Ultra HD/4K and up to 230 ft. (70 meters) at 1080p over category cable with embedded multi-channel audio, CEC pass-through, bi-directional RS-232 and IR control, and PoE - all with zero loss and zero noise. The HCE III Tx/Rx also supports Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio plus LCPM (up to 192 kHz). Additionally, the low profile "slim box" enclosure design make the HCE III ideal for limited space installation environments, such as behind flat panel displays and video walls.