Extron Announces Two Input XTP Wallplate Transmitter for Digital and Analog Signals

This XTP transmitter mounts into a standard three-gang junction box

Extron Electronics is pleased to introduce the XTP T UWP 302, a two-input XTP wallplate transmitter that provides the convenience of connecting local source devices at a wall or other locations including a lectern or floor box. This XTP transmitter mounts into a standard three-gang junction box, and sends HDMI or RGBHV video, audio, and control up to 330 feet (100 meters) over a single CATx cable. It is HDCP-compliant and supports computer-video to 1920×1200, including HDTV 1080p/60 Deep Color and 2K. For simplified integration, the XTP T UWP 302 features automatic switching between inputs with selectable prioritization, and can be powered over the same CATx cable. The XTP T UWP 302 is designed for use in XTP Systems for signal distribution and long-distance transmission between remote endpoints.


"This wallplate transmitter for XTP Systems enables easy AV access for guest presenters or when bringing in temporary sources," says Casey Hall, Vice President of Sales and Marketing for Extron. "The XTP T UWP 302 transmitter offers the flexibility to accept digital or analog signals, in a discreet wall or furniture installation."

The XTP T UWP 302 can transmit HDMI with its embedded audio, or alternatively, embed audio from a separate analog stereo input prior to transmission. To further simplify integration with HDMI-equipped devices, this XTP transmitter features two Extron technologies. EDID Minder ensures continuous EDID communication between devices. For transmission of HDMI signals with protected content, Key Minder authenticates and maintains HDCP encryption to provide quick and reliable transmission across the XTP System infrastructure.

To watch a product introduction video, please visit www.extron.com/xtptuwp302video

For more information.about the XTP T UWP 302, please visit www.extron.com/xtptuwp302pr

Featured Product

REPLACEMENT INTERCOM SYSTEM WITH BUILT-IN MP3 DISTRIBUTION

REPLACEMENT INTERCOM SYSTEM WITH BUILT-IN MP3 DISTRIBUTION

RETRO-M is designed to replace existing Home Intercom Systems and operate on existing 3 and 4 wire systems. BLUETOOTH you music by adding the BT-RECEIVER. No need to remove existing master wall housing, trim plates available to cover those large holes. The RETRO-M intercom unit has a built-in AM/FM radio. Plug in mp3 players such as iPod, iPhone, Zune or any other hand held player into the master and share your music with the entire family. Choose between two music sources; listen to the radio in one room and the mp3 in another room.