Award-Winning IAV LightSpeaker® and AudioRock® Speaker Systems are Now Available

Online Store Expanded to Support Sales Outside the US and Mexico

MISSOULA, MT and DENVER, CO (CEDIA EXPO Booth #2518) - September 23, 2013 - IAV LightSpeaker®, the manufacturer of the patented speaker system that combines efficient LED lighting and wireless sound into a single unit that installs like a light bulb, today announced that the Company has added to the award-winning IAV LS5.2.2 LightSpeaker® System with the recent addition of the IAV RS5.2.0 Wireless AudioRock® System. Each was recently awarded innovative technology awards from a prestigious US-based trade publication and the entire line is available for purchase by consumer either online or through dealers in the US and Mexico.


IAV LightSpeaker® is a patented speaker system that combines efficient LED lighting and wireless sound into a single unit that installs like a light bulb. A unique product utilizing patented AudioLight® Technology, LightSpeaker® combines an LED light and a high-quality loudspeaker that installs like a light bulb. Designed to fit into most 5" and 6" (R30 or R40) recessed lighting fixtures. They also can be used in common lamps, by adding an optional LampKit®. Utilizing a proprietary 2.4 GHz wireless technology that is discreet from the home network, LightSpeaker serves as a robust audio network. The full range driver has been customized to maximize the available air volume and digital signal processing to deliver the best possible sound, with depth, clarity and range.

The Wireless AudioRock® System is intended to easily install in any outdoor location without any expensive and complicated wiring. A typical system can be installed in just a few minutes without running any additional wires. The system includes a Wireless transmitter with two (2) Source Inputs and two (2) Separate Zone Outputs. Additional AudioRocks or LightSpeakers can be added to the transmitter or system as desired.  

Interested parties are encouraged to connect with IAV LightSpeaker by visiting www.iavlightspeaker.com, calling (877) 591-2491, or emailing info@iavlightspeaker.com. Follow IAV LightSpeaker on Twitter at twitter.com/IAVLightSpeaker.

About IAV LightSpeaker

In an age where multi-room audio is accessible to almost anyone, IAV LightSpeaker® sparked the beginning of both a new era and a new category. Utilizing patented AudioLight® technology, the LightSpeaker® line combines an LED light and a high-quality loudspeaker that delivers a simplified audio experience unlike any other. Designed to install like a light bulb and constructed to fit into most 5" and 6" recessed lighting fixtures, LightSpeaker also serves as a robust yet discreet audio network that provides rich sound that is full of clarity and range. Using only 10 watts to produce light bright enough to replace up to a 65-watt bulb, LightSpeaker is highly efficient and capable of lasting up to 15 years. Evolving to meet the needs of a varied consumer audience, the Company added AudioRock® speakers to the lineup for portable outdoor use during the summer of 2013. Both LightSpeaker and AudioRock systems were awarded a 2013 Technology Integrator EXCITE Award for unique, innovative and high performance products.
More information about IAV LightSpeaker can be obtained by calling (877) 591-2491, e-mailing info@iavlightspeaker.com, or by visiting www.iavlightspeaker.com. Follow IAV LightSpeaker on Facebook at www.facebook.com/pages/IAVLightspeaker/279480795490860 and on Twitter at www.twitter.com/IAVLightSpeaker.

Featured Product

MIDLITE®'s SPEEDPORT Universal Cable Pass Thru, Fastening & Anchor System

MIDLITE®'s SPEEDPORT Universal Cable Pass Thru, Fastening & Anchor System

Use for any Low Voltage Cabling, A/V, Telecom, Data, Networking Ideal for : Sound Bars & Wall Speakers • Home Theater Cabling • A/V Furniture The SPEEDPORT™ is incredibly versatile and is ideal for wall mounted box speakers, sound bars and wireless access devices mounted in ceilings. It can accommodate almost any device needed to be hung on a wall or ceiling with cable pass thru and mounting. The ultra low profile design features a rubber grommet insert for bulk cable pass thru. Two mounting screws are hidden behind the grommet and offer a clean, unobtrusive presentation. Installation is quick & simple using a hole saw and attaches to acoustical ceiling tiles and/or gypsum board. Reducing labor and a whole lot of mess from hand cutting large rectangular holes - Low voltage brackets are no longer needed. Just cut your hole in the desired location, insert SPEEDPORT™ and tighten adjustable mounting arms to fasten securely.