TruAudio Introduces New Underground Subwoofer Based On Beatles' Popular Song

Introducing the yellow SubTerrain

ST. GEORGE---September 19, 2013-TruAudio introduces new yellow SubTerrain Subwoofer based loosely on a song made popular by the Beatles. The SubTerrain will be demonstrated in a unique underground display at the TruAudio booth (#500) at CEDIA.


"The very definition of underground subs is… they're underground. In other words, once they go in the earth you don't see much of them anymore. So, we figured that afforded us a little creative license. One thing led to another and now you have the yellow SubTerrain," Bryan Garner, President, said with an impish grin.

But the SubTerrain underground subwoofer is not just about creative design and marketing frivolity. The SubTerrain was purposefully designed to produce deeper bass, higher volume and a better sound.

Most underground subwoofers push sound straight up their port tube only to hit a u-shaped cap that directs it straight down to the ground. Clients don't want sound directed at the ground. They want it dispersed throughout the surrounding area.

The SubTerrain was designed with a bell-shaped port tube at both ends to allow maximum air flow. Maximizing the air flow maximizes the bass volume produced by the SubTerrain's 10" injected polypropylene driver.

The SubTerrain was also topped with a specially-designed soft curve cap. Thus the bass sound is evenly dispersed over a wider area rather than directed into the ground.

Finally, the SubTerrain comes in a vibrant, neon yellow. That way, clients will be anxious to get this baby in the ground - and will be excited about enjoying a yard full of booming bass for a long time to come!

See the yellow SubTerrain in its underground display at the TruAudio booth (#500) at CEDIA.

"We all love the yellow SubTerrain, the yellow SubTerrain, the yellow SubTerrain!"

Featured Product

Platinum Tools - ezEX-RJ45 Termination & Test Kit Giveaways at InfoComm

Platinum Tools - ezEX-RJ45 Termination & Test Kit Giveaways at InfoComm

The new EXOtm Crimp Frame and ezEX-RJ45® Connectors provide the solution for terminating larger diameter Cat6/6A twisted-pair cables. Made in USA. • Conductor sizes up to .048", • Die sets for EZ-RJ45 & ezEX-RJ45 connectors • Feed-through EZ-RJ45 design verifies EIA568A/B wiring • One-step to crimp and flush cut/trim EZ-RJ45 conductor ***Get scanned at InfoComm #1961 for Test Kit Giveaway***