TIP10RF - Home Automation now also operable from outside your home

TIP10RF, the latest controller to operate Marmitek X-10 Home Automation using the free app* on your smartphone or tablet.

Marmitek X10 Home Automation enables you to (automatically) operate equipment and switch lighting on/off within your home.


Obviously, you can already operate the system by using either a Marmitek remote control, a computer with the Marmitek software plus interface or a personalised Touch Panel that could be used both as a wall panel or a table model.

But now it's also possible to operate your Marmitek X10 installation from anywhere in the world using your smartphone or tablet.

Image removed by sender. Marmitek Tip10RFClose your shutters from your holiday address when your weather app warns you about a thunderstorm approaching your home. Turn on the lights while approaching your home to avoid entering a dark driveway. Switch on the garden lights while at a party, because your brother wants to come by your home and borrow the barbecue. Wherever you are, use your smartphone or tablet to operate your X-10 Home Automation System.

Installing the TIP10RF is easy. Connect the receiver to your router at home, install the app and it's ready for operation. The TIP10RF has a suggested retail price of € 59.95 (incl. VAT).
Further information and sales addresses can be found on www.marmitek.com.

Featured Product

ELK Products -C1M1 Dual-Path Alarm Communicators with Remote Services

ELK Products -C1M1 Dual-Path Alarm Communicators with Remote Services

C1M1 offers a truly significant reduction in transmission time in comparison to other communicators that rely on dial capture or data bus decoding. This can result in quicker response time to emergency situations which could save lives and assets. By providing both IP and cellular pathways, C1M1 provides the reliability installers are looking for in an alarm communicator. C1M1 eliminates port forwarding and extra fees for remote access. Installers can remotely upload/download programming changes to M1 controls over IP or cellular using ElkRP2. Consumers can control the M1 remotely via the free ElkLink mobile app and web portal, as well as eKeypad and M1 Touch Pro apps. Other IP-based software and interface partners can connect to the M1 control over the local network through C1M1. C1M1 also provides email/text notifications for arm, disarm, and alarm events. ELK-C1M14GSM supports GSM (AT&T/T-Mobile) networks and ELK-C1M1CDMA supports CDMA (Verizon) networks.