FSR Unleashes Multi-Format Scaling Matrix Switcher

Reduces the challenges associated with integrating legacy analog gear with newly installed digital video products.

August 1st, 2013


Woodland Park, NJ - FSR has announced the immediate availability of the new DVS-MFSW-94XT, a multi-format 9×4 scaling matrix switcher that reduces the challenges associated with integrating legacy analog gear with newly installed digital video products.

The 94XT offers 9 inputs: 4 HDMI with stereo audio, 3 HDMI via CAT x cable, and 2 multi-format analog inputs. On the output side, there are 2 HDMI outputs and 2 HDMI over CATx outputs, each scaled to match the resolution of the display.

"While most new purchases of video equipment are digital, there is an incredibly large installed base of legacy analog equipment already in place. The 94XT extends the life of the legacy gear by allowing it to operate seamlessly alongside the newest digital video equipment," explained Jan Sandri, FSR president.

The 94XT incorporates intelligent EDID and HDCP management along with high bandwidth ADC's and scalers to make not only the installation, but the operation of the overall system "Plug-n-Play" simple.

"We felt that it was important for the 94XT to be able to operate flawlessly in environments where users can arrive with nearly any computer, tablet or other video device, plug it in and have it simply work. Too many other products work only in fixed environments and our world is far from a fixed environment," added Joe Fischer, FSR's director of engineering.

For additional flexibility, the 94XT has 2 additional balanced stereo audio inputs, 1 unbalanced stereo audio output, and SPDIF outputs for each video output. It can be controlled from the front panel, remotely via RS-232 or TCP/IP, or through the built-in web server.

To realize the full potential of the 94XT, FSR offers the DV-HXT family of HDMI over CATx extenders. They can send 1080p up to 165 feet and plug directly into the 94XT offering extended input and output distances without the need to have additional transmitters or receivers at the switcher. The transmitters are available as standalone "bricks" or as wall plates while the receivers are available in "brick" form only.

About FSR
FSR, established in 1981, manufactures a wide variety of products for the audio / video, education, hospitality, government, and religious markets, including AV floor, wall, table, and ceiling connectivity boxes, as well as a full line of interfaces, distribution amplifiers, matrix switchers, seamless switchers and CAT-5 solutions.

The company is an Energy Star Partner and complies with the American Recovery and Reinvestment Act of 2009 to demonstrate its deep commitment to preserving the planet. FSR offers live 24/7 technical and sales support throughout the country from expertly trained technicians and sales representatives. For more information: www.fsrinc.com.

Featured Product

Video Mount Products DVR-LB3

Video Mount Products DVR-LB3

The DVR-LB3 is a low profile DVR lockbox design for 19-inch equipment racks. It is 2-post or 4-post mountable with adjusting rear flanges to accommodate a variety of rack depths. The DVR-LB3 is designed for both active or passive thermal management to accommodate whatever situation is necessary. Additional specs include interior dimensions of 17.2in. W x 21in. D x 5in H, stand alone or rack mountable with a 3 RU overall height (5.25-in.), interlocking lift off lid, multiple vents with removable vent blockers, single fan included with mounting location for second fan, key locked hinged front door, and black static resistant powder coat finish.