Audio Extractor w/EDID Management is Problem Solver

The EMX-HD-AUD HDMI Audio Extractor w/EDID Management resolves many system level HDMI signal-chain issues by allowing incompatible components to function properly.


Along with Audio Extraction for HDMI and EDID management it includes cable equalization, audio and video status indication, and USB port for connection to a PC. The device can be used to extract digital and analog audio from HDMI, pass-thru or learn EDID from any display, and re-clock TMDS video and DDC data. Multi-color LED's indicate EDID routing and real-time indication of the HDMI video and audio. The audio outputs include analog and multi-channel digital TOSLINK. Each of the audio outputs can be independently muted, including the audio in the HDMI output.

The EMX-HD-AUD is HDMI 1.3 and 1.4 compatible, compensates for signal degradation caused by long video cable runs up to 50 ft (15 m) on its input and drives HDMI cables to 30 ft (10 m).

For additional information please contact:
Gail Haghjoo (800) 959-6439 Ext. 223
Hall Research Technologies
1163 Warner Avenue, Tustin CA 92780

Featured Product

MIDLITE®'s SPEEDPORT Universal Cable Pass Thru, Fastening & Anchor System

MIDLITE®'s SPEEDPORT Universal Cable Pass Thru, Fastening & Anchor System

Use for any Low Voltage Cabling, A/V, Telecom, Data, Networking Ideal for : Sound Bars & Wall Speakers • Home Theater Cabling • A/V Furniture The SPEEDPORT™ is incredibly versatile and is ideal for wall mounted box speakers, sound bars and wireless access devices mounted in ceilings. It can accommodate almost any device needed to be hung on a wall or ceiling with cable pass thru and mounting. The ultra low profile design features a rubber grommet insert for bulk cable pass thru. Two mounting screws are hidden behind the grommet and offer a clean, unobtrusive presentation. Installation is quick & simple using a hole saw and attaches to acoustical ceiling tiles and/or gypsum board. Reducing labor and a whole lot of mess from hand cutting large rectangular holes - Low voltage brackets are no longer needed. Just cut your hole in the desired location, insert SPEEDPORT™ and tighten adjustable mounting arms to fasten securely.