Octava HDMI Matrix over Single CATx - Video.Audio.Control.PoE -200ft

Check out the Octava HD4xSTPMX CardFrame HDMI Matrix designed per our System Integrator and client request. The new Octava CardFrame Matrix distributes any 4 HDMI Sources to up to 8 Zones. Connect each Zone Receiver via a single CAT6 cable. The Matrix can be configured with 1 to 8 outputs for enhanced system flexibility . The plug-in output cards enable your System Installer to add zones as required with minimum initial investment. Power over Ethernet (PoE) provides power to your Zone Receivers for clean and convenient installations.

• 4 HDMI inputs.
• Up to 8 outputs (Installer configurable).
• Non-blocking Matrix - view Any Source on Any Display.
• 3D, 1080P, and 4K resolutions supported.
• Distributes all signals over single CAT6 cables up to 200ft (60m).

- HD Video + Audio

- Power over Ethernet provides power to Zone Receivers.

- IR from remote Zones to control the Matrix, 4x Sources (Routed) plus your AVR.
- IR and RS-232 command forwarding via Matrix to each Zone.
• EDID Management plus custom EDID via USB and LAN port.
• Front Panel Control - allows users to Store and Quickly recall favorite Input/Output configurations.
• Ideal for Residential, Commercial and Sports Bar installations.

Featured Product

MIDLITE®'s SPEEDPORT Universal Cable Pass Thru, Fastening & Anchor System

MIDLITE®'s SPEEDPORT Universal Cable Pass Thru, Fastening & Anchor System

Use for any Low Voltage Cabling, A/V, Telecom, Data, Networking Ideal for : Sound Bars & Wall Speakers • Home Theater Cabling • A/V Furniture The SPEEDPORT™ is incredibly versatile and is ideal for wall mounted box speakers, sound bars and wireless access devices mounted in ceilings. It can accommodate almost any device needed to be hung on a wall or ceiling with cable pass thru and mounting. The ultra low profile design features a rubber grommet insert for bulk cable pass thru. Two mounting screws are hidden behind the grommet and offer a clean, unobtrusive presentation. Installation is quick & simple using a hole saw and attaches to acoustical ceiling tiles and/or gypsum board. Reducing labor and a whole lot of mess from hand cutting large rectangular holes - Low voltage brackets are no longer needed. Just cut your hole in the desired location, insert SPEEDPORT™ and tighten adjustable mounting arms to fasten securely.