New Motion-Sensitive Light Control Reduces Lighting Costs Up to 30% for Fast ROI

This breakthrough device senses when people enter or leave rooms and by automatically turning off lights when an area or room is empty can reduce energy use for lighting costs by 30%.

Philadelphia, PA March 12, 2013


Optixtal, Inc., a Delaware Corporation, announced the introduction of the new motion-sensitive Optixtal(R) GreenPatch(TM) interior lighting control. This breakthrough device senses when people enter or leave rooms and by automatically turning off lights when an area or room is empty can reduce energy use for lighting costs by 30%. The GreenPatch is fully powered by self charging Optixtal SuperXcap capacitors and requires neither battery nor hard wiring. Micro solar cells on the front of the device harvest the energy from sunlight or ambient room lighting to keep the capacitors charged and the device working for up to 50 hr. of dark time.

The self-adhesive GreenPatch control panel is small in size (6.5 cm x 9.5 cm) and, once activated, ready to be pressed onto a suitable wall location. The GreenPatch then updates critical changes in a room/area's occupancy and transmits the information via an electronics interface to a building's automation control center up to a 1/2 mile away where conditions in the room can be continuously monitored and changed to match building energy conservation objectives.

The SuperXcap capacitors that power the GreenPatch control panel are available as stand-alone capacitors whose size and shape flexibility, plus fast and high-power charge capability, make them adaptable to a variety of unique applications. Users can count on 50,000 cycles before change out is required.

For more information and descriptive literature on the OptiXtal GreenPatch or OptiXtal SuperXCap capacitors, contact the company at 215-254-5225. Or, visit http://www.Optixtal.com

Featured Product

PureLink - HCE III TX/RX: 4K HDR over HDBaseT Extension System w/ Control and Bi-Directional PoE

PureLink - HCE III TX/RX: 4K HDR over HDBaseT Extension System w/ Control and Bi-Directional PoE

The HCE III Tx/Rx HDBaseT™ extension system offers full HDMI 2.0 compliance supporting HDR (High Dynamic Range) and 4K@60Hz with 4:4:4 chroma sampling. Featuring PureLink's proprietary Pr©cis codec, a light compression technology, the HCE III can transport Ultra HD/4K, multi-channel audio, and High Dynamic Range (10 bits support) content over a single CATx cable. The HCE III provides HDMI extension up to 130 feet (40 meters) at Ultra HD/4K and up to 230 ft. (70 meters) at 1080p over category cable with embedded multi-channel audio, CEC pass-through, bi-directional RS-232 and IR control, and PoE - all with zero loss and zero noise. The HCE III Tx/Rx also supports Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio plus LCPM (up to 192 kHz). Additionally, the low profile "slim box" enclosure design make the HCE III ideal for limited space installation environments, such as behind flat panel displays and video walls.