A New Summit In Loudspeaker Excellence: HARMAN's JBL Introduces Its Upgraded Project Everest DD67000 Flagship Loudspeaker at CES 2013

The DD67000 features new woofers and a refined crossover network

LAS VEGAS, Nevada - At CES 2013 HARMAN's JBL makes history once again with the introduction of its new flagship Project Everest DD67000 loudspeaker, incorporating a host of upgrades to achieve an extraordinary new standard in loudspeaker performance. The DD67000 features new woofers, a refined crossover network and additional improvements to deliver remarkable musical accuracy.

"Our previous Project Everest DD66000 was a landmark sonic achievement," said Jim Garrett, Director of Marketing and Product Management, HARMAN Luxury Audio Group and Loudspeakers. "However, in the six years since it was introduced, the HARMAN team in Northridge have not stood still. We have continued to advance the design to push the performance threshold of this class leading speaker, resulting in significant performance improvements that is sure to thrill the most veteran audiophiles and passionate music lovers."

The JBL Project Everest DD67000 delivers the emotion, grandeur and nuance of music with consummate realism, with real-life scale and dynamic presence from its authoritative bass through its natural midrange and transparent, extended frequency response to beyond 50kHz. Complementing its stunning performance, the Project Everest DD67000 is striking in appearance, blending classic JBL design elements that are evocative of the company's legendary Hartsfield and Paragon loudspeakers with contemporary styling. The DD67000 retains curved and angled surfaces of its predecessor and a dramatically flared midrange horn, complemented by the loudspeaker's beautiful furniture-grade craftsmanship, elegant rosewood finish with the addition of a new carbon-fiber baffle trim panel and elegant rosewood and maple finishes.

The DD67000 is equipped with two of the new 1501AL-2 cast-aluminum-frame woofers, featuring a three-layer laminated cone construction comprised of an inner and outer layer of pure pulp stock with an inner foam-injection-material core. This woofer cone combines high rigidity and fast response for taut, articulate, low frequency with greater extension down to 29 Hz (-10dB anechoic). Performance is further improved by the 1501AL-2's newly designed accordion-pleated poly/cotton surround, yielding a woofer with a fundamental resonance that is 10Hz higher than previously for improved agility and "snap" and a more consistent tonal balance at any volume. Additional features include a massive 4-inch voice coil immersed in an Alnico 5DG magnet that is immune to temperature changes, a copper-steel-laminated top plate that contributes to more linear magnetic behavior within the driver, and additional details.

The 476Be midrange/high-frequency compression driver utilizes a 4-inch, pure-beryllium diaphragm that is formed as an integral one-piece diamond-embossed surround and dome. The 476Be also features a 4-inch aluminum edge-wound voice coil, a rapid-flare coherent-wave phasing plug, a pure-copper-sleeved polepiece that maintains maximum magnetic gap flux and other enhancements to deliver extraordinary transparency and natural vocal and instrumental reproduction.

The DD67000's 045Be-1 ultrahigh-frequency compression driver uses a 1-inch beryllium diaphragm and 2-inch neodymium magnet to produce frequency response beyond 50kHz. The driver features a new precision-cast, pure-magnesium phasing plug that offers better heat dissipation for improved clarity even at higher volumes, and improved manufacturing processes have enabled the driver to provide nearly 5dB more output above 30kHz.

Both compression drivers are mounted in JBL's exclusive computer-optimized Bi-Radial® horns that are made from the company's acoustically inert SonoGlass® material, eliminating the unwanted strident colorations that can occur with conventional horn designs. The horns are shaped to provide optimum dispersion in the horizontal and vertical planes, for smooth frequency response and precise imaging over a wider on- and off-axis area.

The Project Everest DD67000 employs a unique crossover network. It is designed to let the woofers operate in different frequency ranges, which provides optimum directivity and high output. The crossover network uses a DC bias system that keeps the capacitors operating in Class A mode, yielding maximum sonic purity. The network is comprised of four separate circuit boards - one for each transducer - to optimize each board for each driver and its corresponding frequency range.

The DD67000's performance can be fine tuned for any system and room thanks to its front-mounted control panels that enable precise adjustment of low-frequency and high-frequency level and other characteristics. The JBL Project Everest DD67000 is built entirely without compromise with top-quality components including air-core inductors, polypropylene foil capacitors, wire-wound and metal oxide resistors used in multiples to prevent value shift during high-power operation and more. Every attempt has been made for the loudspeaker to present as smooth a driving impedance as possible to the power amplifiers. The measured performance of the DD67000 is exceptional - and its musical performance is nothing less than astonishing.

The JBL Project Everest DD67000 loudspeaker will be available in February 2013 at a suggested retail price of $75,000/pair.

HARMAN (www.harman.com) designs, manufactures and markets a wide range of audio and infotainment solutions for the automotive, consumer and professional markets - supported by 15 leading brands, including AKG®, Harman Kardon®, Infinity®, JBL®, Lexicon® and Mark Levinson®. The Company is admired by audiophiles across multiple generations and supports leading professional entertainers and the venues where they perform. More than 25 million automobiles on the road today are equipped with HARMAN audio and infotainment systems. HARMAN has a workforce of about 13,900 people across the Americas, Europe and Asia, and reported net sales of $4.4 billion for year ended June 30, 2012.

Featured Product

Art Diffusor® Model D by Acoustics First

Art Diffusor® Model D by Acoustics First

The ArtDiffusor® Model D (patent applied for) is the newest in the ArtDiffusor® Series. The Model D is an organic, quadratic diffuser; fusing diverse design concepts such as MLS, QRD, bicubic interpolation and boolean logic mapping. These rolling, asymmetric diffusers minimize specular acoustic reflections while improving sound clarity and ambience. Their design encourages developing customized patterns, allowing for a truly unique installation - every time.