Moog Announces Release of "Analog Delay," First Delay Designed Exclusively for the 500 Series Pro Audio Format

The Analog Delay is a 100% analog signal path module that features 800ms of delay time, front panel MIDI control, and an assignable Tap Tempo/CV jack on its front panel.

October 29th, 2012


Today Moog Music announced the release of the "Analog Delay," the first delay designed and created exclusively for the 500 series pro audio format. The Analog Delay is a 100% analog signal path module that features 800ms of delay time, front panel MIDI control, and an assignable Tap Tempo/CV jack on its front panel. Included with each unit is a free VST/AU/RTAS editor for easy implementation into any recording, live, and performance situation.

The Analog Delay has been designed with tone, connectivity, and flexibility at the forefront. Moog's engineering team worked tirelessly to deliver a delay with an incredibly clean front end that could easily be pushed into a warm, natural overdrive for saturated delay trails or distorted delay effects.

Though not on the front panel, the Analog Delay features a 6 Waveshape LFO that allows users to create other time based effects such as tape delay, chorus and extremely modulated sounds. The LFO is easily accessed via MIDI and the free VST/AU/RTAS Analog Delay plug-in editor.

Also accessible via the included editor are advanced features like Tap/CV input routing, Keyboard Control settings, Clock Divisions and a Delay Multiplier for access to illegal delay times (up to 4x the front panel position). In addition to Tap Tempo and CV control, the Tap/CV input can also convert click track audio into a tap tempo signal.

The new Moog 500 Series Analog Delay module will be debuting at the 2012 AES conference in San Francisco booth 1222 and is expected to begin shipping in Dec. 2012

Featured Product

PureLink - HCE III TX/RX: 4K HDR over HDBaseT Extension System w/ Control and Bi-Directional PoE

PureLink - HCE III TX/RX: 4K HDR over HDBaseT Extension System w/ Control and Bi-Directional PoE

The HCE III Tx/Rx HDBaseT™ extension system offers full HDMI 2.0 compliance supporting HDR (High Dynamic Range) and 4K@60Hz with 4:4:4 chroma sampling. Featuring PureLink's proprietary Pr©cis codec, a light compression technology, the HCE III can transport Ultra HD/4K, multi-channel audio, and High Dynamic Range (10 bits support) content over a single CATx cable. The HCE III provides HDMI extension up to 130 feet (40 meters) at Ultra HD/4K and up to 230 ft. (70 meters) at 1080p over category cable with embedded multi-channel audio, CEC pass-through, bi-directional RS-232 and IR control, and PoE - all with zero loss and zero noise. The HCE III Tx/Rx also supports Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio plus LCPM (up to 192 kHz). Additionally, the low profile "slim box" enclosure design make the HCE III ideal for limited space installation environments, such as behind flat panel displays and video walls.