Auralex® Offers SheetBlok-AF™ Sound Isolation Barrier Material with New Base-Coat Paint

- Designed with contractors and system integrators in mind, SheetBlok-AF™ is a finish-grade isolation product more effective than solid lead at stopping the transmission of sound -

NDIANAPOLIS, IN, SEPTEMBER 27, 2012 - Auralex® Acoustics, Inc., the world's leading brand of acoustical treatments and soon to celebrate its 35th anniversary, offers its new SheetBlok-AF™ Sound Isolation Barrier material. Designed with system integrators seeking sound isolation solutions for both new construction and retrofit situations in mind, Auralex's new SheetBlok-AF is a thin, dense isolator with a Class A fire-rated PVC laminate on its surface for a finished aesthetic. Intended as a solution for improved sound isolation between adjacent spaces, SheetBlok-AF can be implemented in home theaters, apartments, listening spaces, studios, offices and anywhere an increase in sound isolation is desired.


SheetBlok-AF is at least 6dB more effective than solid lead at stopping the transmission of sound. It acts as a thin, dense sound barrier layer in wall, ceiling and floor systems and is most effective when used as one component of a multi-layered construction scheme. However, SheetBlok-AF can be applied directly over the existing wall, and using Auralex's proprietary base-coat paint (available in 1-gallon or 5-gallon containers), SheetBlok-AF is fully paintable using any latex paint, coordinating it with any decor.

SheetBlok-AF is supplied in 4'x10' sheets that can be trimmed for custom fit. It is affixed with trowel-applied adhesive, which allows proper positioning and alignment during installation. With careful installation techniques, a virtually seamless appearance will result.

SheetBlok-AF is now available. For more information, please visit www.auralex.com.

Featured Product

Platinum Tools - ezEX-RJ45 Termination & Test Kit Giveaways at InfoComm

Platinum Tools - ezEX-RJ45 Termination & Test Kit Giveaways at InfoComm

The new EXOtm Crimp Frame and ezEX-RJ45® Connectors provide the solution for terminating larger diameter Cat6/6A twisted-pair cables. Made in USA. • Conductor sizes up to .048", • Die sets for EZ-RJ45 & ezEX-RJ45 connectors • Feed-through EZ-RJ45 design verifies EIA568A/B wiring • One-step to crimp and flush cut/trim EZ-RJ45 conductor ***Get scanned at InfoComm #1961 for Test Kit Giveaway***