Lowell Expands Surge Suppression Offerings with New Models

- New rackmount panels and power strips offer cost-effective single- and dual-stage surge protection -



- New rackmount panels and power strips offer cost-effective single- and dual-stage surge protection -

Lowell Manufacturing Company, a U.S. manufacturer of professional A/V Products currently celebrating its 65th anniversary, has expanded its range of surge suppression products with three new models: ACR-1509-S and ACR-1509-SD (rackmount panels) and ACS-1505-SW-SD (power strip). All three were developed to provide system integrators with high quality, cost-effective surge suppression solutions.

The ETL-listed ACR-1509-S and ACR-1509-SD are 1U 19-inch EIA rackmount panels with a total of nine 15A outlets (3 switched, 6 unswitched), front rocker switch, and nine-foot power cord with NEMA 5-15P plug. The ACR1509-S offers single-stage surge suppression, while the ACR-1509-SD offers dual-stage (redundant) protection. Both models are made in the USA with domestic and foreign parts.

The ACS-1505-SW-SD is a low-profile, 15A rackmount power strip that measures only 2 inches by 2 inches by 12 inches yet includes five single outlets (all switched) with spacing for external power supplies plus the new dual-stage surge suppression. ETL Listed in the US and Canada, this power strip includes a six-foot detachable power cord with molded plug and universal mounting brackets.

For more information, please visit www.lowellmfg.com or e-mail Lowell at sales@lowellmfg.com.

Featured Product

PureLink - HCE III TX/RX: 4K HDR over HDBaseT Extension System w/ Control and Bi-Directional PoE

PureLink - HCE III TX/RX: 4K HDR over HDBaseT Extension System w/ Control and Bi-Directional PoE

The HCE III Tx/Rx HDBaseT™ extension system offers full HDMI 2.0 compliance supporting HDR (High Dynamic Range) and 4K@60Hz with 4:4:4 chroma sampling. Featuring PureLink's proprietary Pr©cis codec, a light compression technology, the HCE III can transport Ultra HD/4K, multi-channel audio, and High Dynamic Range (10 bits support) content over a single CATx cable. The HCE III provides HDMI extension up to 130 feet (40 meters) at Ultra HD/4K and up to 230 ft. (70 meters) at 1080p over category cable with embedded multi-channel audio, CEC pass-through, bi-directional RS-232 and IR control, and PoE - all with zero loss and zero noise. The HCE III Tx/Rx also supports Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio plus LCPM (up to 192 kHz). Additionally, the low profile "slim box" enclosure design make the HCE III ideal for limited space installation environments, such as behind flat panel displays and video walls.