GreenPeak launches the GP710: the first dual-protocol ZigBee chip

The dual ZigBee network solution for Set-Top Box and Gateway combines ZigBee RF4CE and ZigBee IP/ZigBee PRO for Smart Home Solutions

IBC2012 Booth 1.F90


Utrecht, The Netherlands - 05 September 2012 - GreenPeak Technologies, a leading Smart Home RF-communication semiconductor company, today announced the launch of the new GP710, a dual-protocol ZigBee communications controller with simultaneous support for ZigBee RF4CE and ZigBee IP/ZigBee PRO protocols.

The GP710 communication controller is targeted for set-top boxes, gateways and Smart Home controllers and designed for supporting simultaneously ZigBee RF4CE applications - such as remote controls - as well as ZigBee IP or ZigBee PRO Smart Home applications such as security, home care and energy management.

The benefits of this GreenPeak dual-protocol communication chip are much simpler product design, cost reduction of the total product bill-of-material (single silicon) and a less complex PCB and antenna that makes it simpler and faster for developers to integrate ZigBee into their set-top box or gateway designs.

"The GP710 provides a low cost solution that combines different ZigBee Network protocols into a single chip," said Cees Links, Founder and CEO of GreenPeak Technologies. "GreenPeak has developed special hardware features to enable multi-protocol support, minimizing the interrupt load on the set-top box processor, and allowing simultaneous RF4CE and other ZigBee protocol operations. This is a first for the industry! Because of GreenPeak's superior range that covers the whole home and its ultra-low power consumption for long battery life, the GP710 is the best in class choice for integrated low cost Smart Home ZigBee applications."

Cees Links continues: "Many large operators already support ZigBee RF4CE in the set-top box and remote controls and have an urgent need to broaden the service offering to their customers. GreenPeak's GP710 communications controller will make new Smart Home service offerings less expensive because new residential applications can all be controlled from the set-top box or gateway using a single device."

"This solution leverages the growing availability of ZigBee RF4CE in the market," said Tom Kerber, Director, Research, Home Controls & Energy, Parks Associates. "Adding ZigBee IP/ZigBee Pro to the ZigBee RF4CE silicon will make it easy for service providers already using ZigBee RF4CE remote controls to add home automation devices - now an area of significant focus by communications service providers."

ZigBee and ZigBee RF4CE, ZigBee PRO and ZigBee IP are trademarks of the ZigBee Alliance.

GreenPeak at IBC2012

GreenPeak will be at IBC2012 - Booth 1.F90 (Hall 1-F90).

For more information or a live demonstration, please visit the GreenPeak booth at IBC2012 - Amsterdam - 07-11 September 2012 - or make an appointment with our sales team.

About GreenPeak Technologies
GreenPeak Technologies is a fabless semiconductor company and is a leader in ZigBee silicon solutions for the smart home.

GreenPeak is privately funded. It is headquartered in Utrecht, The Netherlands and has offices in Belgium, Japan and Korea.

GreenPeak has won the prestigious 2012 Red Herring Top 100 Europe award and is recognized as a leader in developing new wireless technologies for consumer electronics and smart home applications, demonstrating rapid growth and adoption by major customers.

For more information, please visit www.greenpeak.com

Featured Product

ELK Products -C1M1 Dual-Path Alarm Communicators with Remote Services

ELK Products -C1M1 Dual-Path Alarm Communicators with Remote Services

C1M1 offers a truly significant reduction in transmission time in comparison to other communicators that rely on dial capture or data bus decoding. This can result in quicker response time to emergency situations which could save lives and assets. By providing both IP and cellular pathways, C1M1 provides the reliability installers are looking for in an alarm communicator. C1M1 eliminates port forwarding and extra fees for remote access. Installers can remotely upload/download programming changes to M1 controls over IP or cellular using ElkRP2. Consumers can control the M1 remotely via the free ElkLink mobile app and web portal, as well as eKeypad and M1 Touch Pro apps. Other IP-based software and interface partners can connect to the M1 control over the local network through C1M1. C1M1 also provides email/text notifications for arm, disarm, and alarm events. ELK-C1M14GSM supports GSM (AT&T/T-Mobile) networks and ELK-C1M1CDMA supports CDMA (Verizon) networks.