IAV INTRODUCES THE LIGHTSPEAKER - THE ULTIMATE WIRELESS SPEAKER SYSTEM COMBINED WITH LED LIGHTING FOR SEAMLESS INSTALLATIONS.

The LightSpeaker is the ultimate combination of wireless audio, lighting, and ease of installation.

MISSOULA, MT, August 20, 2012 - IAV is pleased to announce the IAV LightSpeaker LS5 series of wireless speaker systems and products. LightSpeaker is the patented combination a speaker, LED Light for "Green" lighting, and amplifier that produce state of the art sound and light in one unit. To make this combination even better the LightSpeaker simply installs like a light bulb in standard 5" and 6" celing cans and can also be utilized in table lamp applications.


The LightSpeaker system can be installed in under 30 minutes and allows for two source/two zone operation. LightSpeaker allows for countless installation applications such as multi-room audio retrofit, commercial applications, Home Theater rear channels, wireless outdoor audio, etc. The system can also be expanded to include up to 16 LightSpeakers in a system.

The LightSpeaker line of products not only includes the LS5 LightSpeaker but also other wireless components including the W6.2.0 wireless subwoofer and the RS.2.0 AudioRock. The subwoofer compliments the LightSpeaker satellite speakers adding increased sound range to any LightSpeaker system. It's wireless reception allows placement anywhere that there is an electrical outlet. The AudioRock allows for great sounding audio outdoors and is completely wireless utilizing a re-chargeable Lithium-ion battery.

"The LightSpeaker is the ultimate combination of wireless audio, lighting, and ease of installation," says Krista Bergaman of IAV. "For any integrator the LightSpeaker can combine with the source components in any system to ease system installations, eliminating wiring issues. The system is incredibly easy to install and provides unique solutions for indoor and outdoor audio for both IAV dealers and their customers".

The IAV LightSpeaker will be on display at Cedia Expo 2012' in the Cleerline Technology Group booth #4041 or appointments can be made for system demonstrations. IAV LightSpeaker can be contacted @ 877-591-2491 or 801-721-7199 or at info@iavlightspeaker.com.

With the popularity of distributed audio systems and desire for outdoor audio, the LightSpeaker marks the beginning of a new category and an age where multi-room audio is accessible to anyone. The LightSpeaker system utilizes a proprietary 2.4 ghz wireless technology that is discreet from your home network. It is an audio network, which as proven amazingly robust. The full range driver has been customized to maximize the available air volume and benefits from the digital signal processing to bring you the best possible sound from such a unique loudspeaker. The sound surprises all who listen in both its clarity and range.

Featured Product

PureLink - HCE III TX/RX: 4K HDR over HDBaseT Extension System w/ Control and Bi-Directional PoE

PureLink - HCE III TX/RX: 4K HDR over HDBaseT Extension System w/ Control and Bi-Directional PoE

The HCE III Tx/Rx HDBaseT™ extension system offers full HDMI 2.0 compliance supporting HDR (High Dynamic Range) and 4K@60Hz with 4:4:4 chroma sampling. Featuring PureLink's proprietary Prcis codec, a light compression technology, the HCE III can transport Ultra HD/4K, multi-channel audio, and High Dynamic Range (10 bits support) content over a single CATx cable. The HCE III provides HDMI extension up to 130 feet (40 meters) at Ultra HD/4K and up to 230 ft. (70 meters) at 1080p over category cable with embedded multi-channel audio, CEC pass-through, bi-directional RS-232 and IR control, and PoE - all with zero loss and zero noise. The HCE III Tx/Rx also supports Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio plus LCPM (up to 192 kHz). Additionally, the low profile "slim box" enclosure design make the HCE III ideal for limited space installation environments, such as behind flat panel displays and video walls.