Extron Announces New Dual Link DVI Fiber Optic Extender

The extender delivers dual link DVI-D signals up to 500 meters (1,640 feet) over two multimode cables or single link DVI signals over one fiber optic cable.

Anaheim, California (July 31, 2012) - Extron Electronics is pleased to introduce the DDX 102 Dual Link DVI Fiber Optic Extender, an efficient transmitter and receiver set for long haul delivery of DVI signals over fiber optic cabling. It uses all digital technology to deliver perfect pixel-for-pixel transmission of video images up to 2560x1600, including HDTV 1080p/60. The extender delivers dual link DVI-D signals up to 500 meters (1,640 feet) over two multimode cables or single link DVI signals over one fiber optic cable. The capabilities and compact size of the DDX 102 make this fiber optic extender ideal for sending high resolution DVI content in a wide variety of applications.


"AV system designers, integrators, and consultants are turning to fiber optic technology because of its unique ability to send the highest resolution video signals over very long distances," says Casey Hall, Vice President of Sales and Marketing for Extron. "The DDX 102 provides a compact, cost effective solution for extending dual link DVI signals over fiber optic cabling."

The DDX 102 transmitter and receiver feature industry standard LC-type connectors, and can be used for point-to-point fiber optic applications with dual link DVI requirements. The units connect directly to the DVI source and display devices, eliminating the need for additional mounting hardware. EDID Minder automatically manages EDID by maintaining continuous communication with the source, ensuring that it powers up properly and reliably outputs content for display. The transmitter also provides an EDID capture mode to store display EDID.

Visit our Web site at www.extron.com for more information.

Featured Product

PureLink - HCE III TX/RX: 4K HDR over HDBaseT Extension System w/ Control and Bi-Directional PoE

PureLink - HCE III TX/RX: 4K HDR over HDBaseT Extension System w/ Control and Bi-Directional PoE

The HCE III Tx/Rx HDBaseT™ extension system offers full HDMI 2.0 compliance supporting HDR (High Dynamic Range) and 4K@60Hz with 4:4:4 chroma sampling. Featuring PureLink's proprietary Prcis codec, a light compression technology, the HCE III can transport Ultra HD/4K, multi-channel audio, and High Dynamic Range (10 bits support) content over a single CATx cable. The HCE III provides HDMI extension up to 130 feet (40 meters) at Ultra HD/4K and up to 230 ft. (70 meters) at 1080p over category cable with embedded multi-channel audio, CEC pass-through, bi-directional RS-232 and IR control, and PoE - all with zero loss and zero noise. The HCE III Tx/Rx also supports Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio plus LCPM (up to 192 kHz). Additionally, the low profile "slim box" enclosure design make the HCE III ideal for limited space installation environments, such as behind flat panel displays and video walls.