Glasses-free 3-D TV looks nearer

A new method for producing multiple-perspective 3-D images could prove more practical in the short term than holography.

JUL. 11, 2012 CAMBRIDGE, Mass. -- As striking as it is, the illusion of depth now routinely offered by 3-D movies is a paltry facsimile of a true three-dimensional visual experience. In the real world, as you move around an object, your perspective on it changes. But in a movie theater showing a 3-D movie, everyone in the audience has the same, fixed perspective - and has to wear cumbersome glasses, to boot.


Despite impressive recent advances, holographic television, which would present images that vary with varying perspectives, probably remains some distance in the future. But in a new paper featured as a research highlight at this summer's Siggraph computer-graphics conference, the MIT Media Lab's Camera Culture group offers a new approach to multiple-perspective, glasses-free 3-D that could prove much more practical in the short term.

Instead of the complex hardware required to produce holograms, the Media Lab system uses several layers of liquid-crystal displays (LCDs), the technology currently found in most flat-panel TVs. To produce a convincing 3-D illusion, the displays would need to refresh at a rate of about 360 times a second, or 360 hertz. Such displays may not be far off: LCD TVs that boast 240-hertz refresh rates have already appeared on the market, just a few years after 120-hertz TVs made their debut.

"Holography works, it's beautiful, nothing can touch its quality," says Douglas Lanman, a postdoc at the Media Lab and one of the new paper's co-authors. "The problem, of course, is that holograms don't move. To make them move, you need to create a hologram in real time, and to do that, you need … little tiny pixels, smaller than anything we can build at large volume at low cost. So the question is, what do we have now? We have LCDs. They're incredibly mature, and they're cheap."

Layers of research

The Nintendo 3DS - a portable, glasses-free 3-D gaming device introduced last year - uses two layered LCD screens to produce the illusion of depth, with the bottom screen simply displaying alternating dark and light bands. Two slightly offset images, which represent the different perspectives of the viewer's two eyes, are sliced up and interleaved on the top screen. The dark bands on the bottom screen block the light coming from the display's backlight in such a way that each eye sees only the image intended for it.

This technique is in fact more than a century old and produces a stereoscopic image, the type of single-perspective illusion familiar from 3-D movies. The bottom screen displays the same pattern of light and dark bands no matter the image on the top screen. But Lanman, graduate student Matthew Hirsch and professor Ramesh Raskar, who leads the Camera Culture group, reasoned that by tailoring the patterns displayed on the top and bottom screens to each other, they could filter the light emitted by the display in more sophisticated ways, creating an image that would change with varying perspectives. In a project they dubbed HR3D, they developed algorithms for generating the top and bottom patterns as well as a prototype display, which they presented at Siggraph Asia in 2010.

The problem is that, whereas a stereoscopic system such as a 3-D movie projector or the 3DS needs to display only two perspectives on a visual scene - one for each eye - the system the Media Lab researchers envisioned had to display hundreds of perspectives in order to accommodate a moving viewer. That was too much information to display at once, so for every frame of 3-D video, the HR3D screen in fact flickered 10 times, displaying slightly different patterns each time. With this approach, however, producing a convincing 3-D illusion would require displays with a 1,000-hertz refresh rate.

To get the refresh rate down to 360 hertz, the researchers added another LCD screen, which displays yet another pattern. That makes the problem of calculating the patterns exponentially more complex, however. In solving that problem, Raskar, Lanman and Hirsch were joined by Gordon Wetzstein, a new postdoc in the Camera Culture group.

CT in reverse

As it turns out, the math is similar to that behind computed tomography, or CT, an X-ray technique used to produce three-dimensional images of internal organs. In a CT scan, a sensor makes a slow circle around the subject, making a series of measurements of X-rays passing through the subject's body. Each measurement captures information about the composition of tissues at different distances from the sensor; finally, all the information is stitched together into a composite 3-D image.

"The way I like to think about it is, we're building a patient whose CT scan is the view," Lanman says.

At Siggraph, the Media Lab researchers will demonstrate a prototype display that uses three LCD panels. They've also developed another prototype that uses only two panels, but between the panels they introduce a sheet of lenses that refract light left and right. The lenses were actually developed for stereoscopic display systems; an LCD panel beneath the lenses alternately displays one image intended for the left eye, which is diffracted to the left, and another for the right eye, which is diffracted to the right. The MIT display also takes advantage of the ability to project different patterns in different directions, but the chief purpose of the lenses is to widen the viewing angle of the display. With the three-panel version, the 3-D illusion is consistent within a viewing angle of 20 degrees, but with the refractive-lens version, the viewing angle expands to 50 degrees.

Featured Product

Introducing the revolutionary Comelit Visto Smart Doorbell

Introducing the revolutionary Comelit Visto Smart Doorbell

The Visto Doorbell is a new Smart Doorbell from Comelit which combines a modern Italian design with all of the basic features you are looking for in a smart video doorbell. In fact, it is so smart that it can use the 2 wires from your existing doorbell and pass both the power and the data signals. This solves the common problem of having poor wifi coverage all the way at your front door. The Visto also has built in night vision, video recording on a SD card and in the cloud, motion detection, and multiple mounting options including an angle mount. The second thing we are introducing is the Visto Dealer referral program. Because we only sell through the Professional Distribution channel, we want to give our dealers who buy in that channel extra incentives to sell our product. For any security dealers or installers who go on our website www.vistodoorbell.com, and sign up for our program, we will offer the following: - Free referrals to customers in your area - Cashback program - 10% discount during the 1st month of the launch - Free Visto t-shirts and gear - A chance to win a trip for 2 to Venice, Italy Its that easy. Let us refer customer to you and get paid in the process. All while selling a wonderful Italian designed smart doorbell which is innovative and easy to install. So all dealers should protect the pro-channel and install products like the Visto which are made and sold only at your friendly local security and low voltage distributors.