Auralex® Introduces SheetBlok-AF™ Sound Isolation Barrier Material

Designed with contractors and system integrators in mind, SheetBlok-AF™ is a finish-grade isolation product more effective than solid lead at stopping the transmission of sound

INDIANAPOLIS, IN, JUNE 28, 2012 - Auralex® Acoustics, Inc., the world's leading brand of acoustical treatments and soon to celebrate its 35th anniversary, introduces its new SheetBlok-AF™ Sound Isolation Barrier material. Based on the company's popular SheetBlok™ construction-grade sound barrier product, SheetBlok-AF is a thin, dense isolator with a Class A fire-rated PVC laminate on its surface for a finished look. It is intended as a solution for improved sound isolation between adjacent spaces in the retrofit market where aesthetic appearance is important, but invasive construction and demolition are impossible. With an STC rating of 27 or greater, SheetBlok-AF is at least 6dB more effective than solid lead at stopping the transmission of sound. It acts as a thin, dense sound barrier layer in wall, ceiling and floor systems and is most effective when used as one component of a multi-layered construction scheme, as described in Auralex's widely respected Acoustics101™ publication.


SheetBlok-AF has been designed with consideration for the contractor/system integrator who is doing either retrofit or new construction. SheetBlok-AF can be implemented in offices, apartments, studios, home theaters and anywhere an increase in sound isolation is desired. No wall construction (or reconstruction) is necessary, and SheetBlok-AF is fully paintable to coordinate with any decor.

SheetBlok-AF will be supplied in 4'x10' sheets that can be trimmed to fit with a utility knife or metal shears. It is affixed with trowel-applied adhesive, which allows proper positioning and alignment during installation. With careful installation techniques, a virtually seamless appearance will result.

SheetBlok-AF will be available July 2012. For more information, please visit www.auralex.com.

Featured Product

PureLink - HCE III TX/RX: 4K HDR over HDBaseT Extension System w/ Control and Bi-Directional PoE

PureLink - HCE III TX/RX: 4K HDR over HDBaseT Extension System w/ Control and Bi-Directional PoE

The HCE III Tx/Rx HDBaseT™ extension system offers full HDMI 2.0 compliance supporting HDR (High Dynamic Range) and 4K@60Hz with 4:4:4 chroma sampling. Featuring PureLink's proprietary Prcis codec, a light compression technology, the HCE III can transport Ultra HD/4K, multi-channel audio, and High Dynamic Range (10 bits support) content over a single CATx cable. The HCE III provides HDMI extension up to 130 feet (40 meters) at Ultra HD/4K and up to 230 ft. (70 meters) at 1080p over category cable with embedded multi-channel audio, CEC pass-through, bi-directional RS-232 and IR control, and PoE - all with zero loss and zero noise. The HCE III Tx/Rx also supports Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio plus LCPM (up to 192 kHz). Additionally, the low profile "slim box" enclosure design make the HCE III ideal for limited space installation environments, such as behind flat panel displays and video walls.