Accell Unveils UltraAV DisplayPort to DVI-D Dual-Link Active Adapter with 3D Support

The DisplayPort to DVI Adapter connects a DisplayPort or Mini DisplayPort enabled computer to a DVI Dual-Link digital display or projector

Fremont, Calif. - May 15, 2012 - Accell, a provider of premium audio/video, computer and mobile device accessories, today announced the release of the company's newest addition to its extensive product line, the UltraAV DisplayPort to DVI-D Dual-Link Active Adapter featuring support for 3D displays. With an MSRP of $109.99, Accell's DisplayPort to DVI Adapter is available now.


The UltraAV DisplayPort to DVI-D Dual-Link active adapter provides the connection from a DisplayPort or Mini DisplayPort enabled computer to a DVI Dual-Link supported digital display. For video cards featuring a Mini DisplayPort video output, users can easily convert the adapter to a Mini DisplayPort connection using the included DisplayPort to Mini DisplayPort adapter.

"Accell's latest DisplayPort to DVI adapter supports monitor refresh rates up to 120Hz, ideal for use with 3D DVI monitors," stated Michael Weizer, director of marketing, Accell. "Those that embrace 3D technology, such as gamers and designers, will gravitate towards this product."

Accell's UltraAV DisplayPort to DVI-D Dual-Link Active Adapter supports both Single-Link or Dual-Link DVI and features the following:

• Supports resolutions to 2560x1600@60Hz or 1920x1080@120Hz for 3D displays
• Up to 10.8Gbps throughput over four lanes at a 330MHz total pixel clock rate
• Converts to a Mini DisplayPort connector using the included adapter

The UltraAV adapter features a built-in active protocol converter delivering up to 10.8Gbps throughput, a 330MHz maximum pixel clock rate and support of 120Hz 3D displays. In addition, Accell's adapter connects to a USB port for power, eliminating the use of a bulky power adapter.


About Accell
Accell Corporation is focused on the design, manufacture and delivery of affordable, high quality accessories for the audio/video, mobile device and computer markets. Accell produces high quality and innovative products by combining the low cost benefits of a global manufacturer and the design capabilities of a Silicon Valley based engineering and marketing team. Accell is a member of CEDIA and CEA. For more information, please visit our Web site at http://www.accellcables.com and follow us on Twitter at @AccellCables.



###

Press Contacts:
Megan Saulsbury
Canyon PR for Accell Corporation
(408) 857-9527
megan@canyonpr.com

Michael Weizer
Accell Corporation
(510) 770-8284
michael_weizer@accellcables.com

Featured Product

PureLink - HCE III TX/RX: 4K HDR over HDBaseT Extension System w/ Control and Bi-Directional PoE

PureLink - HCE III TX/RX: 4K HDR over HDBaseT Extension System w/ Control and Bi-Directional PoE

The HCE III Tx/Rx HDBaseT™ extension system offers full HDMI 2.0 compliance supporting HDR (High Dynamic Range) and 4K@60Hz with 4:4:4 chroma sampling. Featuring PureLink's proprietary Prcis codec, a light compression technology, the HCE III can transport Ultra HD/4K, multi-channel audio, and High Dynamic Range (10 bits support) content over a single CATx cable. The HCE III provides HDMI extension up to 130 feet (40 meters) at Ultra HD/4K and up to 230 ft. (70 meters) at 1080p over category cable with embedded multi-channel audio, CEC pass-through, bi-directional RS-232 and IR control, and PoE - all with zero loss and zero noise. The HCE III Tx/Rx also supports Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio plus LCPM (up to 192 kHz). Additionally, the low profile "slim box" enclosure design make the HCE III ideal for limited space installation environments, such as behind flat panel displays and video walls.