Acoustics First Designs Tone Tiles

Paintable, Design Friendly Acoustical Panel System

As a follow up to the recent PhaseFOAM™ system, the Acoustics First design team has invented a new wall panel system named Tone Tiles™, www.ToneTiles.com. Tone Tile™ acoustical panels are now ready to be shipped and deployed into any application requiring sound control. This new acoustical system offers acoustical absorption with limitless design potential and installation possibilities.


The white soft drywall texture appearance of the tile allows you to install them right out of the box or paint with a matte finish spray paint to complement colors on site. These sound absorbing panels are covered with a paintable / printable finish, allowing you to match any design scheme.

The unique 2'x1' size of the panel allows one the freedom to create diverse wall tile patterns and mount around existing room obstructions. Optional 2" Stand-Off Mounting Brackets further acoustical control by creating an air gap, increasing absorption and improving low frequency response. The 2" space behind the panels also presents an opportunity for back lighting effects. Employing optional Corner Mounting Clips permits the installer to construct one foot wide or two foot wide custom bass traps in room corners.

10 ea. 2' x 1' Tone Tile™ panels in each box for $350.00 USD.
Optional Mounting Clips:
Acoustics First 2" Stand off Clips, Box of 20 Clips AF2SC20 $ 80.00
Acoustics First Corner Clips, Box of 8 pair (8 Left & 8 Right) AFCC8 $ 48.00

-Spray Paint Panels to Complement Color Schemes
-Have Printed Images Applied to Panel Face
-Design Unique Wall Patterns
-Apply Stencil Designs
-Increase Absorption Using 2" Stand off Clips
-Easily Construct Custom Bass Traps

www.ToneTiles.com

View the product Video: http://vimeo.com/acoustics1st/tonetile

Featured Product

PureLink - HCE III TX/RX: 4K HDR over HDBaseT Extension System w/ Control and Bi-Directional PoE

PureLink - HCE III TX/RX: 4K HDR over HDBaseT Extension System w/ Control and Bi-Directional PoE

The HCE III Tx/Rx HDBaseT™ extension system offers full HDMI 2.0 compliance supporting HDR (High Dynamic Range) and 4K@60Hz with 4:4:4 chroma sampling. Featuring PureLink's proprietary Prcis codec, a light compression technology, the HCE III can transport Ultra HD/4K, multi-channel audio, and High Dynamic Range (10 bits support) content over a single CATx cable. The HCE III provides HDMI extension up to 130 feet (40 meters) at Ultra HD/4K and up to 230 ft. (70 meters) at 1080p over category cable with embedded multi-channel audio, CEC pass-through, bi-directional RS-232 and IR control, and PoE - all with zero loss and zero noise. The HCE III Tx/Rx also supports Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio plus LCPM (up to 192 kHz). Additionally, the low profile "slim box" enclosure design make the HCE III ideal for limited space installation environments, such as behind flat panel displays and video walls.