Everyone is talking about it, Marmitek has it: wireless 3D!

Transmit Full HD 3D signal without any loss of quality and without cables

EINDHOVEN - Marmitek, specialist in audio/video operation, transmission and connectivity, is introducing the GigaView 821. As the first in Europe to come up with a wireless 3D HDMI solution, Marmitek is once again demonstrating its credentials as an exceptionally innovative company. The GigaView 821 wirelessly transmits the signal from the connected HD devices without compression and without any loss of quality to your HDTV or projector.


Flexible positioning of your TV screen or projector
The GigaView 821 provides the ultimate combination of ease-of-use, flexibility and interior design. Its wireless capability means it is not necessary to lay cables from your HD sources to your TV or projector. As a result, it is easy to position the TV or to change its location without having to deal with a mass of corresponding cables. Connecting a TV in the kitchen to a decoder in the living room has never been so easy! The infrared 'pass trough' also means that you can continue to operate the HD devices even though they are out of sight.

So how does it work?
The GigaView 821 comprises two stylised boxes which serve as transmitter and receiver respectively. The receiver is connected to the TV and the transmitter can be connected to a maximum of 2 (HD) devices. This includes Blu-ray® players, digital video recorders (DVRs), HD set-top boxes, gaming consoles (PS3™ or Xbox® 360), Media Center PCs or standard DVD players/recorders. Switching between these devices is simple with one press of a button on the remote control supplied.

3D
The Marmitek GigaView 821 supports all 3D resolutions. This has never been seen before in Europe. It will also, of course, effortlessly transmit 2D signals. The product fulfils the HDCP standard which means there is maximum compatibility with other HDMI equipment.

Uncompressed
With the GigaView 821, the HD signal wirelessly bridges a distance of up to 25 metres (line of sight; up to 15m with obstacles) to the HDTV or projector without any loss of quality. The Marmitek GigaView 821 transmits the 1080p signal without first compressing it. The wirelessly received signal is then sent on without any delay (ideal for game consoles) and with exactly the same properties as when it would be transmitted via a top quality HDMI cable.

Price and availability
The Marmitek GigaView 821 has a recommended retail price of € 329 incl. VAT and is available immediately.
Further information and sales addresses can be found on www.marmitek.com

Featured Product

PureLink - HCE III TX/RX: 4K HDR over HDBaseT Extension System w/ Control and Bi-Directional PoE

PureLink - HCE III TX/RX: 4K HDR over HDBaseT Extension System w/ Control and Bi-Directional PoE

The HCE III Tx/Rx HDBaseT™ extension system offers full HDMI 2.0 compliance supporting HDR (High Dynamic Range) and 4K@60Hz with 4:4:4 chroma sampling. Featuring PureLink's proprietary Prcis codec, a light compression technology, the HCE III can transport Ultra HD/4K, multi-channel audio, and High Dynamic Range (10 bits support) content over a single CATx cable. The HCE III provides HDMI extension up to 130 feet (40 meters) at Ultra HD/4K and up to 230 ft. (70 meters) at 1080p over category cable with embedded multi-channel audio, CEC pass-through, bi-directional RS-232 and IR control, and PoE - all with zero loss and zero noise. The HCE III Tx/Rx also supports Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio plus LCPM (up to 192 kHz). Additionally, the low profile "slim box" enclosure design make the HCE III ideal for limited space installation environments, such as behind flat panel displays and video walls.