Platinum Tools® Launches New Coax Clarifier™ Layout/Fault Finder

Tester is Designed to Help the Field Technician Qualify and Quantify 'Dark' Coax Systems; will Determine Individual Run Quality as well as the System's Capability to Deliver Good Quality Video at Both Standard and High Definition Levels

CAMARILLO, Calif., March 12, 2012 - Platinum Tools (www.platinumtools.com), the leader in solutions for the preparation, installation and hand termination of wire and cable, is proud to announce the launch of the new Coax Clarifier™ layout/fault finder.


"The Coax Clarifier system has been designed to qualify and quantify 'Dark' coax systems," explained Lee Sachs, Platinum Tools, Inc. president and general manager. "The field technician often comes across 'Dark' unpowered coax systems that give no clue as to their design, condition, or configuration. Made in the U.S.A, the Coax Clarifier helps solve this problem."

The Coax Clarifier determines individual run quality as well as to determine the ability of the overall system's capability to deliver good quality video at both standard and high definition levels. With an easy-to-read large backlit LCD, the Coax Clarifier shows loss levels on each coax cable run and displays a bar graph of quality for each. Detecting and testing splitters for quality, shorts/opens, etc. is also done on each test. Finally, the Coax Clarifier uses inexpensive wiremap remotes that allow the technician to singlehandedly "map" an entire system easily and quickly. Cable length measurements, signal quality measurements, and wiremapping all in one compact, rugged tester.

In addition, separate wire mapping sets allows a technician to map out the entire coax system and measure the quality and characterization of the overall network for carrying services, such as high grade video, surveillance data, and HD programming. It also has the ability identify the testing remotes through splitters, showing the end location of multiple runs off of installed splitters.

Additional Coax Clarifier features and specifications include:
• Measures cable length up to 1,500 ft. (457 meters)
• Four unique tones to distinguish between respective outlets
• Wiremaps up to 12 coax locations
• Size: 6.8 x 3.15 x 1.3 inches
• Weight: 12 oz (with battery)
• MSRP: $329 - $379 USD (depending on kit configuration)

For more information on Platinum Tools and its complete product line, please visit www.platinumtools.com, call (800) 749-5783, or email info@platinumtools.com.

About Platinum Tools
Platinum Tools, founded in 1997, was created based upon two very simple objectives. First, develop the absolute best possible solutions for the preparation, installation, and hand termination of wire and cable. Second, implement an operational infrastructure that can deliver these products in an efficient, timely, and high quality manner.

All of our products must absolutely satisfy three critical benchmark criteria…utility of function; quality of function; and economic value. Our people are our company. They, too, must be focused on and work to satisfy three critical benchmark criteria…customer satisfaction; product knowledge and expertise; and willingness to learn and adapt.

# # #

Featured Product

REPLACEMENT INTERCOM SYSTEM WITH BUILT-IN MP3 DISTRIBUTION

REPLACEMENT INTERCOM SYSTEM WITH BUILT-IN MP3 DISTRIBUTION

RETRO-M is designed to replace existing Home Intercom Systems and operate on existing 3 and 4 wire systems. BLUETOOTH you music by adding the BT-RECEIVER. No need to remove existing master wall housing, trim plates available to cover those large holes. The RETRO-M intercom unit has a built-in AM/FM radio. Plug in mp3 players such as iPod, iPhone, Zune or any other hand held player into the master and share your music with the entire family. Choose between two music sources; listen to the radio in one room and the mp3 in another room.