Cellular Signal Testers Make Installations ...Significantly More Reliable

Siretta Antennas have two Cellular Signal Testers available which make Installations significantly more reliable, because tests can be ran to find the perfect spot.

2G Signal Tester - SWGPRS023

True simplicity of operation of the SWGPRS023 2G signal strength meter really gives installers or engineers help in assessing which cellular generator performs best in an area. The SWGPRS023 is a convenient and low cost hand held tester for all situations. Built to last in all sitautions it is a great investment. Find out more about the 2G Signal Tester - SWGPRS023 http://www.siretta.co.uk/product.php?id=108

And now the 3G Signal Strength Meter! - SW3G023
The new SW3G023 signal strength meter is for use on 3G and GPRS networks and is ideal for all engineers and installers engaged on M2M applications and cellular data. The SWG3023 provides the user with Key ID and performance information on all European cell sites operating on 900/1800 or 2100MHz with or without a SIM card fitted. The SW3G023 is equally simple to operate and gives key network oeprator information. A monitor feature also enables the user to interrogate selected cell sites in real time. Find out more about the 3G Signal Strength Meter - SW3G023 http://www.siretta.co.uk/product.php?id=260

Featured Product

ELK Products -C1M1 Dual-Path Alarm Communicators with Remote Services

ELK Products -C1M1 Dual-Path Alarm Communicators with Remote Services

C1M1 offers a truly significant reduction in transmission time in comparison to other communicators that rely on dial capture or data bus decoding. This can result in quicker response time to emergency situations which could save lives and assets. By providing both IP and cellular pathways, C1M1 provides the reliability installers are looking for in an alarm communicator. C1M1 eliminates port forwarding and extra fees for remote access. Installers can remotely upload/download programming changes to M1 controls over IP or cellular using ElkRP2. Consumers can control the M1 remotely via the free ElkLink mobile app and web portal, as well as eKeypad and M1 Touch Pro apps. Other IP-based software and interface partners can connect to the M1 control over the local network through C1M1. C1M1 also provides email/text notifications for arm, disarm, and alarm events. ELK-C1M14GSM supports GSM (AT&T/T-Mobile) networks and ELK-C1M1CDMA supports CDMA (Verizon) networks.