Octava Inc. adds Power over Cable (PoC) to its ever popular HDMI over Twisted Pair Matrix

The PoC (Power over Cable) socket provides power to the matching Octava In-room Receiver (Rx) units over the connected Twisted Pair (CAT5 or CAT6) cable to simplify installation behind your slim line TV, Projector or AVR.

Responding to requests from our Installer and Integrator customers to further improve our already popular 4x8 and 4x4 HDMI over Twisted Pair Matrix we have added a second power supply socket to the Matrix. The PoC (Power over Cable) socket provides power to the matching Octava In-room Receiver (Rx) units over the connected Twisted Pair (CAT5 or CAT6) cable to simplify installation behind your slim line TV, Projector or AVR.


4x8 and 4x4 full non-Blocking HDMI Matrix (Any Source to Any Display).

Mirrored HDMI + dual RJ-45 Output sockets - enables connection to up to ten (4x8) or eight (4x4) Sink devises (AVR, Display or Projector).

PoC provides Power to the attached Rx units over CAT5 or CAT6 cables.

IR, Push Button, Wired IR and RS232 control.

Rear mounted Wired IR socket - (Optional IR extender Receiver cable available).

Five Pre-configured User selectable EDID modes.

One Programmable EDID mode - via USB port.

3D compatible plus 'Forced 3D' EDID mode.

Supports 1080p (60/50/24)

New uprated 9v 4.0 Amp PSU (x2)

Redesigned Fascia with Mirrored selector buttons for enhanced aesthetics

Free PC control App

Featured Product

MIDLITE®'s SPEEDPORT Universal Cable Pass Thru, Fastening & Anchor System

MIDLITE®'s SPEEDPORT Universal Cable Pass Thru, Fastening & Anchor System

Use for any Low Voltage Cabling, A/V, Telecom, Data, Networking Ideal for : Sound Bars & Wall Speakers • Home Theater Cabling • A/V Furniture The SPEEDPORT™ is incredibly versatile and is ideal for wall mounted box speakers, sound bars and wireless access devices mounted in ceilings. It can accommodate almost any device needed to be hung on a wall or ceiling with cable pass thru and mounting. The ultra low profile design features a rubber grommet insert for bulk cable pass thru. Two mounting screws are hidden behind the grommet and offer a clean, unobtrusive presentation. Installation is quick & simple using a hole saw and attaches to acoustical ceiling tiles and/or gypsum board. Reducing labor and a whole lot of mess from hand cutting large rectangular holes - Low voltage brackets are no longer needed. Just cut your hole in the desired location, insert SPEEDPORT™ and tighten adjustable mounting arms to fasten securely.