Tributaries® Offers Remote Protection and Filtering For Displays and Projectors

TRIBUTARIES® is pleased to introduce a new addition to its line of innovative AC Power products, the PWRI-XF In-wall AC Power Extension Outlet Kit.

Orlando, FL - September 2011 - TRIBUTARIES® is pleased to introduce a new addition to its line of innovative AC Power products, the PWRI-XF In-wall AC Power Extension Outlet Kit. Engineered to work in conjunction with T100 and T200 Power Managers, the dual-outlet XF model provides remote protection and filtering for displays and projections.


The PWRI-XF AC Power Extension Outlet Kit contains three main parts:
• A dual AC outlet with filtering built into a housing that is designed to fit in a dual gang
Carlon® or Raco® box finished with an integral plastic faceplate including a "POWER" LED, for installation behind the TV or projector.

• A Neutrik® 120V/20A UL® rated AC PowerCon® inlet mounted on a single-gang white Decora® wall plate for installation close to the T100/T200 Power Manager.

• A 14AWG shielded AC Power Cable with a Neutrik PowerCon AC plug on one end and a Nema 5-15, 3-prong straight or right angle AC plug on the other end.

With the installation of the PWRI-XF Kit, a TV or projector that is located at a distance from source components can be connected to a T100 or T200 Power Manager taking advantage of its surge suppression and filtering capability. The extra filtering in the PWRI-XF outlet box that would be located behind the TV or projector, provides a 2nd level of protection from EMI/RFI that could be induced into the unshielded in-wall wiring connecting the outlet box to the Neutrik inlet.

The PWRI-XF AC Power Extension Kit provides components with a clean source of power, free of signal degrading noise and distortion. The new model is designed to provide a maximum of 1800W/120V/15A of clean and filtered power to components.

Both inlet and outlet offer key points for safety and installation ease, with two UL® ratings, ability to fit dual- or single-gang wall boxes, and connection via 14AWG Romex® building wire. Kits are available in multiple configurations: 6-foot, 9-foot or 12-foot, AC power cable terminated with a Twist-Lock Neutrik® PowerCon® connector, with the Neutrik® Twist-Lock PowerCon® inlet.

In support of environmental protection, the PWRI-XF is RoHS compliant and also complies with the RoHS provision of California SB 20: Electronic Waste Recycling Act of 2003.

The PWRI-XF is now available, with SRP of $160-180 depending on configuration.

PWRI-XF Specifications
AC OUTLETS
Line voltage 120VAC, 60Hz
Current / Wattage 15 Amp / 1800 Watts
Filtering Frequency/Attn 150KHz to 100MHz/up to 70dB
AC Power Cord 14AWG shielded
Cord Connectors Neutrik®NAC3FCA Power connector/NEMA 5-15
AC Outlet UL® rated
AC Inlet UL® rated 15A/120V Neutrik® NAC3MPA
UL® Safety Certified UL498 & UL514
RoHs RoHs


PHYSICAL
Net Weight 1.5 pounds (kit containing 6ft power cable)
Width 4.75 inches
Height 4.75 inches
Depth 1.8 inches


About Tributaries®
Established in 1991 in Orlando, Florida, Tributaries® is an acknowledged leader in the design, production, and distribution of high-quality audio and video interconnect cables, speaker wires, accessories, and electronics. The company prides itself on its customer service, and has won the CE industry magazine Inside Track Supplier Loyalty Awards a total of 13 times in the past 15 years.

For more information, please visit www.tributariescable.com.

Featured Product

ELK Products -C1M1 Dual-Path Alarm Communicators with Remote Services

ELK Products -C1M1 Dual-Path Alarm Communicators with Remote Services

C1M1 offers a truly significant reduction in transmission time in comparison to other communicators that rely on dial capture or data bus decoding. This can result in quicker response time to emergency situations which could save lives and assets. By providing both IP and cellular pathways, C1M1 provides the reliability installers are looking for in an alarm communicator. C1M1 eliminates port forwarding and extra fees for remote access. Installers can remotely upload/download programming changes to M1 controls over IP or cellular using ElkRP2. Consumers can control the M1 remotely via the free ElkLink mobile app and web portal, as well as eKeypad and M1 Touch Pro apps. Other IP-based software and interface partners can connect to the M1 control over the local network through C1M1. C1M1 also provides email/text notifications for arm, disarm, and alarm events. ELK-C1M14GSM supports GSM (AT&T/T-Mobile) networks and ELK-C1M1CDMA supports CDMA (Verizon) networks.