LongReach II Supports Greater Distance Plus Combined Power, Video and PTZ over One Cat5e/6 Cable

Montreal, Can - MuxLab Inc, leading designer and manufacturer of CCTV connectivity solutions for copper twisted pair, announces its latest product for the CCTV security and surveillance industry…..The LongReach II Active CCTV Receiver Balun (500124)

Montreal, Canada - MuxLab Inc (www.muxlab.com), leading designer and manufacturer of CCTV connectivity solutions for copper twisted pair, announces its latest product for the CCTV security and surveillance industry…..The LongReach II Active CCTV Receiver Balun (500124).


The LongReach II is an enhanced version of the 500015 for extended distance in the analog CCTV environment. The product supports up to 5,000 ft (1.5km) when used with a passive CCTV balun at the camera and up to 7,000 ft (2.1 km) when paired with MuxLab's Active CCTV Transmitter Balun (500100/101).

The product further streamlines cabling beyond the 500015 buy allowing remote power and PTZ control to be combined with video over one Cat5e/6 cable even for extended distance depending on power supply voltage and camera power consumption.

The LongReach II also features improved auto -gain control that stabilizes in less than 1 second where first powered on plus auto -polarity correction for ease of installation.

For additional robustness, the 500124 features ground loop isolation (GLI) up to 50VDC and has built -in surge protection.

Unlike the 500015, the 500124 comes with its own 12VDC power supply and may be installed in any MuxLab rackmount, surface -mount or wall -mount accessory for neater cabling.


For more information, please visit the MuxLab website (www.muxlab.com) or contact MuxLab at
+1 514 -905 -0588, or videoease@muxlab.com.
A 300 DPI product photo is available upon request.

Featured Product

GreenPeak’s GP565 – ZigBee for smart Remote Controls

GreenPeak's GP565 - ZigBee for smart Remote Controls

The GP565 Smart Home RF chip for remote controls supports voice control, motion sensing and the new ZRC 2.0 protocol. The GP565 is optimized for advanced & low cost ZigBee RF4CE remote controls. • 120k or 248k Flash (8k or 16k RAM) memory • 40-pin footprint to support a keyboard scanner interface or other IO interfaces required for remote controls. • Reduced current consumption and improved receiver sensitivity and output power • Patented Antenna Diversity technology enables superior range and WiFi/Bluetooth interference rejection