Make the back speakers for your surround set wireless!

Have you ever bought a surround sound set? If so, you probably quickly realised that it is tricky to work away the cables effectively.

This particularly applies to the cables to the back speakers. Sometimes you have a skirting board under which you can place the cable but this is not always possible. Result: loose cables lying around your living room.


Today, Marmitek is introducing the Surround Anywhere220. A wireless, digital transmitter for your surround sound set which allows you to wirelessly connect your back speakers to your surround amplifier.

During installation, you can set the volume balance to precisely the right level and, after that, you shouldn't need to look at it again. This product is unique because it can simply be connected to the speaker output on the surround amplifier. The back speakers then copy the volume of the amplifier. The fact that the data is transmitted uncompressed and digitally means that the sound is better than CD quality and does not encounter any disruptions or delays.

So get rid of all of those loose cables and enjoy wireless surround sound from your surround set with the Marmitek Surround Anywhere220.

Marmitek Surround Anywhere220 is available from today for Euro 119.95 /GBP 109.95.
For more information and sales points, please go to www.marmitek.com

Featured Product

GreenPeak’s GP565 – ZigBee for smart Remote Controls

GreenPeak's GP565 - ZigBee for smart Remote Controls

The GP565 Smart Home RF chip for remote controls supports voice control, motion sensing and the new ZRC 2.0 protocol. The GP565 is optimized for advanced & low cost ZigBee RF4CE remote controls. • 120k or 248k Flash (8k or 16k RAM) memory • 40-pin footprint to support a keyboard scanner interface or other IO interfaces required for remote controls. • Reduced current consumption and improved receiver sensitivity and output power • Patented Antenna Diversity technology enables superior range and WiFi/Bluetooth interference rejection