Why Electricians Make The Best Solar PV Installers

Electricians make the best solar PV Installers because they are well versed in electrical theory.

Electricians make the best solar PV Installers because they are well versed in electrical theory. The goal of Solar and Solar PV is to transfer the energy provided by the sun into energy that can sustain a home. In order to do this the Solar PV must be wired into the home. It takes the knowledge, skills and experience of a master electrician to do this. They must be able to test, inspect, install and problem solve Solar PV Systems while on the job. Electricians are very good and looking at the big picture analyzing the current system and adapting the solar system to fit into that system.


The Solar PV must be connected to an Inverter. All Solar panels and inverters are different. While some work well together, others need to be trouble shot before the job can commence. The Installer must be able to assist in mounting the panels and run cables from the home to inverters and fuse boxes. As well as be able to map the fuse box and test the system.

There are two types of current, DC Direct Current and AC Alternating Current. A home is run on AC while the energy provided by Solar cells is DC. The Inverter acts as the tool in converting DC to AC. The electrician must be able to properly install this inverter so the system correctly converts the power supply to the home. There is also the option of a battery backup to store electricity for later use. The installer must be able to integrate the battery backup into the system.

Another requirement of the Solar Installer is to be able to create the plans and get the city/state to approve the project and pull a permit. Without electrical experience most people would not be able to do this. It takes training and experience to be able to put these intricate packages together and get them approved. Most of the time the city's planning and building division are uneducated on Solar and need to be walked through the process. If you're not well versed in Electrical theory this could become a huge hindrance to the process.

The city or county that you live in is only one place that needs to approve your plans. You'll also need to get your design, line diagram and other components approved by your local electrical provider. In most cases this is because they control the area in which you are installing the solar. They usually have limits on how big your system can be. This is a long process that is very intricate and detailed same as with any city or county government office. For the same reasons as mentioned above it is a good idea to have an electrical person on staff to run through the intricacies with the reps from the provider.

Well you've heard the details on why an electrician would make the best solar installer it really comes down to common sense. Electricity is provided by solar, who better to install that system but one whose career is electrical in nature. Denver Electrician, Electrician Denver.

Featured Product

VMP EREN-42E1K 19-inch Equipment Rack Enclosure

VMP EREN-42E1K 19-inch Equipment Rack Enclosure

Now shipping, the new 42 rack space EREN-42E1K 19-inch Equipment Rack Enclosure is newest and largest member of VMP's EREN Series. "The EREN Series has been designed for use with a multitude of security, audio, video, and communication components, and the EREN-42E1K is a sizable upgrade in both depth and weight capacity to our popular EREN-42E 19-inch equipment rack enclosure," explained Keith Fulmer, president of VMP. "The EREN-42E1K has a usable depth of 33 inches and a durable load capacity of 1,300 lbs. (a 30 percent increase from the EREN-42E) to fit just about any and every need." The cost-effective, portable, and fully welded EREN family of 19-inch equipment rack enclosures has been designed for installations where protected components are a necessity. The EREN Series, which comes complete with integrated cooling fans and lockable, removable side panels (with optional locks) allows for the organization of multiple electronic components, while at the same time protecting them from thermal issues, as well as damage or theft. Additional EREN Series specifications include: works with all standard 19-inch rack equipment and accessories; rails threaded with standard 10-32 threading; tempered glass front door; double swing steel rear door; adjustable front and rear rails; vented top and bottom; top and bottom cable routing knockouts; reversible hinged front and rear door; casters and leveling feet; ships assembled; EREN-42E1K MSRP: $1,499.00