HomePlug Powerline Alliance Announces Support from Global German Auto Manufacturers for HomePlug GP Specification

Audi, BMW, Daimler, Porsche and Volkswagen Line Up Behind HomePlug Green PHY for Electric Vehicle Charging Technology Standard

Taipei, Taiwan - June 1, 2011 - At its event at COMPUTEX Taipei today, the HomePlug® Powerline Alliance (www.homeplug.org) announced support from Germany's major car manufacturers - Audi, BMW, Daimler, Porsche and Volkswagen - for its HomePlug Technology.


After intense case studies and tests, the five German car manufacturers - working together as the Coordination Office Charging Interface - chose to support HomePlug's IEEE 1901 Profile Green PHY (GP) as the technology for the charging interface of electric vehicles. Additionally, HomePlug has invited the participation of these auto manufacturers in developing the HomePlug Green PHY certification program. The HomePlug Powerline Alliance serves as a compliance and certification body for IEEE 1901 and manages the largest compliance and interoperability certification program for powerline networking products.

"For electric vehicles to be widely accepted, they must integrate into existing and emerging charging infrastructures, connected to the smart grid," noted Dr. Heiko Doerr, Manager of Coordination Office Charging Interface. "For charging electric vehicles, the communication interface is established via the charging connector, and the HomePlug Green PHY provides a common communications standard to support all modes of AC and DC charging."

The HomePlug GP specification, finalized in June 2010, is a low power, highly reliable and cost -optimized powerline networking specification which targets "Smart Grid" applications such as appliances, smart meters, climate control, and plug -in electric hybrid vehicles. Utility companies and manufacturers are looking to adopt communications and networking technologies, such as HomePlug GP, to help consumers and businesses monitor and reduce their energy consumption. More details about HomePlug GP can be found at http://www.homeplug.org/tech/homeplug_gp.
HomePlug GP is a key component of the HomePlug technology portfolio, along with HomePlug AV broadband powerline technology and the upcoming HomePlug AV2 specification. HomePlug AV is the baseline technology for the IEEE 1901 powerline standard. All three specifications are fully interoperable with each other and with IEEE's 1901 powerline standard, and they are designed to make it easier for multiple chip suppliers and manufacturers to deliver products to support IP networking.

"The endorsement and support of these world class manufacturers is a significant step in establishing robust technology standards to deliver on the smart grid promise," commented Rob Ranck, president of the HomePlug Powerline Alliance. "We are delighted with their decision and look forward to working with them to develop the product certification process."

The announcement comes on the heels of recent research reports from In -Stat, Infonetics and Pike Research pointing to the continued leadership of the HomePlug technology standard around the world. Pike Research analyst Bob Gohn commented, "The adoption of standards is a key driver to widespread smart appliance adoption, and our research indicates that HomePlug Green PHY is likely to be the power line standard that gives manufacturers the confidence to rollout products in increasingly greater numbers."

Featured Product

ELK Products -C1M1 Dual-Path Alarm Communicators with Remote Services

ELK Products -C1M1 Dual-Path Alarm Communicators with Remote Services

C1M1 offers a truly significant reduction in transmission time in comparison to other communicators that rely on dial capture or data bus decoding. This can result in quicker response time to emergency situations which could save lives and assets. By providing both IP and cellular pathways, C1M1 provides the reliability installers are looking for in an alarm communicator. C1M1 eliminates port forwarding and extra fees for remote access. Installers can remotely upload/download programming changes to M1 controls over IP or cellular using ElkRP2. Consumers can control the M1 remotely via the free ElkLink mobile app and web portal, as well as eKeypad and M1 Touch Pro apps. Other IP-based software and interface partners can connect to the M1 control over the local network through C1M1. C1M1 also provides email/text notifications for arm, disarm, and alarm events. ELK-C1M14GSM supports GSM (AT&T/T-Mobile) networks and ELK-C1M1CDMA supports CDMA (Verizon) networks.