Kramer Introduces the 910 Digital Audio Preamplifier & Mixer

The 910 is a high-performance stereo audio preamplifier and mixer that accepts balanced and unbalanced stereo audio, S/PDIF digital audio, and a microphone input.

Kramer Electronics is pleased to announce the introduction of the 910 Digital Audio Preamplifier and Mixer. The 910 is a high -performance stereo audio preamplifier and mixer that accepts balanced and unbalanced stereo audio, S/PDIF digital audio, and a microphone input. It then processes the signals and outputs them to balanced, unbalanced and S/PDIF outputs. The 910 is ideal for professional audio applications, sound studios, boardrooms, classrooms, and training rooms.


The 910 has 4 inputs; 1 unbalanced stereo audio input and 1 S/PDIF input on RCA connectors, 1 balanced stereo audio input on a 5 -pin terminal block, and 1 mono balanced microphone input on an XLR (F) connector. The microphone input has a switch to choose between a condenser or dynamic mic input (it provides 15V phantom power when the MIC switch is set for a condenser microphone). These inputs can be selected individually or at the same time when using the talk over, mix, or override modes. The 910 has 1 unbalanced stereo audio output and 1 S/PDIF output on RCA connectors, and 1 balanced stereo audio output on a 5 -pin terminal block. All outputs are live at the same time.

The 910 features various audio controls, including volume, balance, bass, mid, treble, loudness, 7 -band equalizer, delay, mute, expand and compress.

The 910 also features a 24 -character by 2 -line LCD display, and can be controlled using the front panel buttons as well as remotely by RS -232 serial commands (with the included Windows® -based control software), Ethernet, or IR with the included RC -IR2 remote control transmitter. The 910 also includes memory locations that store up to four presets to be recalled and executed as needed, and also features a USB port for convenient firmware upgrades.

The 910 is powered by a standard worldwide power supply and is housed in a standard 19" rack mount size with rack mount "ears" included. The 910 is currently in stock and available from Kramer Electronics sales companies around the world.

Featured Product

Video Mount Products PDS-LC Large Flat Panel Ceiling Mount

Video Mount Products PDS-LC Large Flat Panel Ceiling Mount

The PDS-LC (and PDS-LCB) is a large flat panel ceiling mount that can accommodate most 37-inch to 80-inch flat panels. This versatile mount can handle a wide range of ceiling applications with its adjustable tilt, extension, rotation, and rails to ensure perfect flat panel placement. Features and specifications include a maximum mounting hole pattern - 860mm x 500mm; mast telescopes 23-in. - 35-in. from ceiling; rotates 360 degrees / adjustable 0 - 15 degree tilt; cable management through the center of the mast; load capacity - 180 lbs.; black or silver powder coat finish; MSRP: $259.95