One Fibre Detachable DVI Extender And Passive Splitter Reduce Costs

Two new products introduced by Sequoia Technology Group that distribute DVI signals from one source to many displays break cost and technology barriers. Read more details about this new technology.

Two new products introduced by Sequoia Technology Group that distribute DVI signals from one source to many displays break cost and technology barriers.


Many Digital Signage, Video wall, medical and military applications require a single digital video source to be transmitted to several digital displays using fibre optic extenders and distributors.

A fibre optic DVI extender allows digital video to travel hundreds of meters, without losing any information from interference, allowing the image or video to be shown on the display exactly how the sender expected it. This is not possible using CAT5 type cables, as these are prone to electromagnetic interference losing vital data during the video transfer.

The One Fibre Detachable DVI Extender DVFX -110 is the latest in the line of Fibre Optic products from Sequoia Technology Group capable of driving uncompressed WUXGS (1920x1200) 60 Hz DVI signals up to 1000 meters. Furthermore the self EDID feature allows the EDID data to be read from the display to transmit the video signal with the correct characteristics.
One important characteristic of DVFX -110 is that a single signal from a source (PC, DVD, etc.) can be transmitted to up to 16 displays, or sinks, using the OPS -XYZ passive splitter. The OPS -XYZ does not require external power source, and along with the use of single fibre technology reduces cost in material and installation.

The OPX -XYZ is available in a number of configurations, starting from one input to 16 outputs, to two inputs and 16 outputs. Both the DVFX -110 and the OPS -XYZ use standard LC connectors, popular in fibre optic connections.

Featured Product

PureLink - HCE III TX/RX: 4K HDR over HDBaseT Extension System w/ Control and Bi-Directional PoE

PureLink - HCE III TX/RX: 4K HDR over HDBaseT Extension System w/ Control and Bi-Directional PoE

The HCE III Tx/Rx HDBaseT™ extension system offers full HDMI 2.0 compliance supporting HDR (High Dynamic Range) and 4K@60Hz with 4:4:4 chroma sampling. Featuring PureLink's proprietary Prcis codec, a light compression technology, the HCE III can transport Ultra HD/4K, multi-channel audio, and High Dynamic Range (10 bits support) content over a single CATx cable. The HCE III provides HDMI extension up to 130 feet (40 meters) at Ultra HD/4K and up to 230 ft. (70 meters) at 1080p over category cable with embedded multi-channel audio, CEC pass-through, bi-directional RS-232 and IR control, and PoE - all with zero loss and zero noise. The HCE III Tx/Rx also supports Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio plus LCPM (up to 192 kHz). Additionally, the low profile "slim box" enclosure design make the HCE III ideal for limited space installation environments, such as behind flat panel displays and video walls.