Octava -HDCATS -100 HDMI Extender over 1 CAT 6 cable over 300ft

The HDCATS-100, HDMI over CAT5e/6 Extender allows transmission of HDMI, 100baseT Ethernet data and IR over 1 single CAT-5/6.

The HDCATS -100, HDMI over CAT5e/6 Extender allows transmission of HDMI, 100baseT Ethernet data and IR over 1 single CAT -5 / 6. The HDCATS -100 HDMI Extender consists of a HDMI Transmitter and a HDMI Receiver and allows transmission of 1080P HD over 300ft over single Ethernet cable (CAT -6 recommended). Infrared Extension allows I.R. signals to be sent from viewing area to the equipment room. The Ethernet data port allows IP based HDTV or PC to have access to ethernet connection.


CAT 6 cable is recommended for 1080P and best performance

The HDCATs -100 HDMI over CAT5e/6 Extender carries HDMI and 100baseT Ethernet data simultaneously over 1 cable, therefore existing Ethernet cable can be used without interrupting data connections. Ethernet cables and connectors are easily field terminated thus allowing installers to easily install the proper length cable needed for ultimate flexibility and eliminates logistic problems of having custom length HDMI cables.

Active Drive and Compensation circuitry ensures error free video transmission for the ultimate HD experience .Typical connection lengths of 300 ft ( 1080P).

External Powering. The HDMI -Ethernet utilizes 2 dedicated power supplies to ensure reliability and minimizes loading on your HD sources.

Featured Product

MIDLITE®'s SPEEDPORT Universal Cable Pass Thru, Fastening & Anchor System

MIDLITE®'s SPEEDPORT Universal Cable Pass Thru, Fastening & Anchor System

Use for any Low Voltage Cabling, A/V, Telecom, Data, Networking Ideal for : Sound Bars & Wall Speakers • Home Theater Cabling • A/V Furniture The SPEEDPORT™ is incredibly versatile and is ideal for wall mounted box speakers, sound bars and wireless access devices mounted in ceilings. It can accommodate almost any device needed to be hung on a wall or ceiling with cable pass thru and mounting. The ultra low profile design features a rubber grommet insert for bulk cable pass thru. Two mounting screws are hidden behind the grommet and offer a clean, unobtrusive presentation. Installation is quick & simple using a hole saw and attaches to acoustical ceiling tiles and/or gypsum board. Reducing labor and a whole lot of mess from hand cutting large rectangular holes - Low voltage brackets are no longer needed. Just cut your hole in the desired location, insert SPEEDPORT™ and tighten adjustable mounting arms to fasten securely.