Atlona Technologies 7 inch 1080P Testing Monitor Wins 2010 Custom Retailer EXC!TE Award.

Atlona Technologies to receive Custom Retailer EXC!TE Award at the at CEDIA in Atlanta Georgia for High Definition Testing Monitor with HDMI Input, the AT-DIS7-HD

Atlona Technologies has made headline recently with their answer to almost every installer's need for testing cable and component installations, where displays are remote or not yet present. This solutions based manufacturer of Audio Video accessories, has addressed this issue with the AT -DIS7 -HD, a 7 inch Testing Monitor with an HDMI Input. The industrious DIS7 -HD will be presented with the Custom Retailer EXC!TE Award at CEDIA 2010. Custom Retailer magazine's annual EXC!TE Awards are allocated to the most distinguished industry products that stand out for displaying innovative solutions for all custom installation professionals. Atlona is delighted for the opportunity to receive this EXC!TE award for the one tool that no installer or integrator can do without.


This award winning portable display will recognize any HDMI or DVI source at resolutions up to 1080P or 1920x1200, and allow integrators and installers to observe both audio and video signal in real time. The AT -DIS7 -HD also features an EDID learning function that allows this unit to virtually copy the extended display identification data from any HDTV to accurately mimic that TV for testing purposes. With multiple control options including manual and IR Remote, the AT -DIS7 -HD is perfect for installers and integrators looking for a simple solution to monitor or verify audio and video settings on remote displays. For those looking to test a wider range of formats, Atlona will soon release an advanced version. This newer version of the DIS7 -HD will support HDMI, VGA, and Component signals along with containing a built in speaker and 3D testing capabilities.

Atlona's DIS7 -HD is available now with an affordable MSRP of $349.00, and is currently up for the CEDIA Attendees Choice Awards.



#########
For more information, press only:

PR Director:
Joshua Carlson, (408) 962 -0515 ext 123, JCarlson@atlona.com


For more information, sales only:


Western Regional Sales Manager:
Michael Hawkins (408) 962 -0515 ext 153, Hawkins.m@atlona.com

Central Regional Sales Manager:
Alex Babayan (408) 962 -0515 ext 151, Alex.b@atlona.com

Eastern Regional Sales Manager:
Kevin Billingsley (408) 962 -0515 ext 122, Kevin@atlona.com

Eastern Regional CEDIA Channel Account Manager:
Mike Grubb (408) 962 -0515 ext 156, Mike.g@atlona.com

International Sales:
Ilya Khayn (408) 962 -0515 ext 112, Ilya@atlona.com


For more information on Atlona Products:
http://www.atlona.com

Featured Product

PureLink - HCE III TX/RX: 4K HDR over HDBaseT Extension System w/ Control and Bi-Directional PoE

PureLink - HCE III TX/RX: 4K HDR over HDBaseT Extension System w/ Control and Bi-Directional PoE

The HCE III Tx/Rx HDBaseT™ extension system offers full HDMI 2.0 compliance supporting HDR (High Dynamic Range) and 4K@60Hz with 4:4:4 chroma sampling. Featuring PureLink's proprietary Pr©cis codec, a light compression technology, the HCE III can transport Ultra HD/4K, multi-channel audio, and High Dynamic Range (10 bits support) content over a single CATx cable. The HCE III provides HDMI extension up to 130 feet (40 meters) at Ultra HD/4K and up to 230 ft. (70 meters) at 1080p over category cable with embedded multi-channel audio, CEC pass-through, bi-directional RS-232 and IR control, and PoE - all with zero loss and zero noise. The HCE III Tx/Rx also supports Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio plus LCPM (up to 192 kHz). Additionally, the low profile "slim box" enclosure design make the HCE III ideal for limited space installation environments, such as behind flat panel displays and video walls.