Sensormetrix Introduce I/O Device for IP CCTV Integration

HWg-Juno is I/O device for IP CCTV integration. You can simply connect Digital Inputs & Relay outputs to your current central IP video management system. IP IO Genetec, IP IO Omnicast

Sensormetrix is pleased to introduce you to the new Juno range from HW Group, Juno is set to revolutionise the IP CCTV industry. This is an I/O device for CCTV integration which allows you to connect digital inputs and relay output to your IP video management system. CCTV software sees Juno as an IP camera but without video stream. Utilising the inputs and outputs Juno allows you to connect your CCTV management system to fire systems, entrance gates, power systems, access control systems and many more.


HW Group has teamed up with PSIA, Genetec and Omnicast to offer simple integration. In most cases no extra drivers are required so there is no extra cost for software integration. HWg -Juno is a simple hardware solution for plug & play I/O integration. Low cost and No hassle.

Once you're all up and running outputs are controlled for the IP CCTV software and those outputs can control 110V/230V power. The Juno range offers 4 different products to suit different requirements.

Featured Product

PureLink - HCE III TX/RX: 4K HDR over HDBaseT Extension System w/ Control and Bi-Directional PoE

PureLink - HCE III TX/RX: 4K HDR over HDBaseT Extension System w/ Control and Bi-Directional PoE

The HCE III Tx/Rx HDBaseT™ extension system offers full HDMI 2.0 compliance supporting HDR (High Dynamic Range) and 4K@60Hz with 4:4:4 chroma sampling. Featuring PureLink's proprietary Prcis codec, a light compression technology, the HCE III can transport Ultra HD/4K, multi-channel audio, and High Dynamic Range (10 bits support) content over a single CATx cable. The HCE III provides HDMI extension up to 130 feet (40 meters) at Ultra HD/4K and up to 230 ft. (70 meters) at 1080p over category cable with embedded multi-channel audio, CEC pass-through, bi-directional RS-232 and IR control, and PoE - all with zero loss and zero noise. The HCE III Tx/Rx also supports Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio plus LCPM (up to 192 kHz). Additionally, the low profile "slim box" enclosure design make the HCE III ideal for limited space installation environments, such as behind flat panel displays and video walls.