XANTECH INTRODUCES ITS NEW MRKP2 KEYPADS

XANTECH INTRODUCES ITS NEW MRKP2 KEYPADS

mrkp2


- Featuring a 2.4 -inch TFT LCD touchpanel, the MRKP2 offers contractors and system integrators the ultimate in customization for system configuration -

SYLMAR, CA, June 23, 2010 - Xantech Commercial unveils the company's new MRKP2 keypads. The MRKP2 employs a hybrid keypad design that combines keypad simplicity with full LCD touchpanel features, including transport controls for operating A/V components along with advanced navigation features. With a 2.4 -inch TFT LCD keypad, the MRKP2 offers the ultimate in user experience by combining the benefits of hard keys and touchscreens.

Compatible with Xantech's MX88 and MRC88m, visually the MRKP2 has an updated, contemporary industrial design. The unit is QuickConfig (QC) -enabled, meaning that it is configurable with or without Xantech's Universal Dragon™ software, and it mounts in UL/CSA standard two -gang electrical backboxes and open -back low -voltage frames.

The LCD touchscreen can display up to seven lines of metadata, and employs user -selectable backlight color (blue and green) for its hard buttons. The MRKP2's built -in interference -resistant wide -band IR receiver, along with a powered interface to Xantech external IR receiver modules makes it even more valuable to contractors and system integrators. Additionally, the MRKP2 is hot -swappable.

The unit, along with bezel & trim -plate, ships in standard white; to match any installation, almond, ivory and black colors are available with the KCK2 trim kit sold separately.

Featured Product

PureLink - HCE III TX/RX: 4K HDR over HDBaseT Extension System w/ Control and Bi-Directional PoE

PureLink - HCE III TX/RX: 4K HDR over HDBaseT Extension System w/ Control and Bi-Directional PoE

The HCE III Tx/Rx HDBaseT™ extension system offers full HDMI 2.0 compliance supporting HDR (High Dynamic Range) and 4K@60Hz with 4:4:4 chroma sampling. Featuring PureLink's proprietary Pr©cis codec, a light compression technology, the HCE III can transport Ultra HD/4K, multi-channel audio, and High Dynamic Range (10 bits support) content over a single CATx cable. The HCE III provides HDMI extension up to 130 feet (40 meters) at Ultra HD/4K and up to 230 ft. (70 meters) at 1080p over category cable with embedded multi-channel audio, CEC pass-through, bi-directional RS-232 and IR control, and PoE - all with zero loss and zero noise. The HCE III Tx/Rx also supports Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio plus LCPM (up to 192 kHz). Additionally, the low profile "slim box" enclosure design make the HCE III ideal for limited space installation environments, such as behind flat panel displays and video walls.