HDMI 1x4 Distribution Hub Streamlines AV Cabling

MuxLab Inc (www.muxlab.com), designer and manufacturer of CCTV and audio-video connectivity solutions for copper twisted pair, announces its latest addition to its AV connectivity portfolio…..The HDMI 1x4 Distribution Hub (500420).

MuxLab Inc (www.muxlab.com), designer and manufacturer of CCTV and audio -video connectivity solutions for copper twisted pair, announces its latest addition to its AV connectivity portfolio…..The HDMI 1x4 Distribution Hub (500420).


Developed for the custom residential and commercial AV market, the HDMI 1x4 Distribution Hub (500420) allows one (1) HDMI source to be distributed to up to four (4) HDMI displays via two (2) Cat5e/6 cables. At 1080p/8 -bit resolution, the hub supports up to 150 ft (46m) via Cat5e cable on either side of the hub, thereby allowing a total distance of 300 ft (92m) to be achieved between the HDMI source and the display. Furthermore, the product supports 1080p Deep Color up to 150 ft (46m) via Cat6 cable.

The HDMI 1x4 Distribution Hub includes one (1) IR Emitter for source control works in conjunction with the HDMI IR/Extender (500405 [kit], 500406 [Tx] and 500407 [Rx]). The hub also has a local HDMI output and is fully cascadable to support larger distribution applications.

The HDMI 1x4 Distribution Hub streamlines cabling in applications such as: home theatre, digital signage, boardroom projector systems and classroom training systems. The product allows pre -existing twisted pair to be used instead of costly single -use HDMI cable, thereby allowing HDMI equipment to access the structured cabling system for greater maximum investment return.

The product has a two (2) year warranty and complies with HDMI 1.3a and FCC Class A standards.

For more information, please visit the MuxLab website (www.muxlab.com) or contact MuxLab at
+1 514 -905 -0588, or videoease@muxlab.com.

A 300 DPI product photo is available upon request.

Featured Product

GreenPeak’s GP565 – ZigBee for smart Remote Controls

GreenPeak's GP565 - ZigBee for smart Remote Controls

The GP565 Smart Home RF chip for remote controls supports voice control, motion sensing and the new ZRC 2.0 protocol. The GP565 is optimized for advanced & low cost ZigBee RF4CE remote controls. • 120k or 248k Flash (8k or 16k RAM) memory • 40-pin footprint to support a keyboard scanner interface or other IO interfaces required for remote controls. • Reduced current consumption and improved receiver sensitivity and output power • Patented Antenna Diversity technology enables superior range and WiFi/Bluetooth interference rejection