Quantek Systems Ltd launch the TELCON 500 GSM Remote control switch

Enables remote reset / rebooting of computers, servers and routers from anywhere in the world

The TELCON 500 is a GSM remote control switch, it connects to the mobile phone network and like a mobile phone it has its own telephone number. The TELCON 500 is activated by calling its phone number, it will recognise an authorised telephone number calling it, reject the call without answering and switch on or off the device connected to it, because it rejects the call without answering there are no call costs incurred.


1

Quantek Systems Ltd launch the TELCON 500 GSM Remote control switch
Up to 500 authorised telephone numbers can be stored in the unit's memory. Whenever a call is made to the TELCON 500, it compares the phone number of the incoming call with the numbers stored in its memory. If a match is found, it recognises that the caller is authorised and the unit will activate.

The TELCON 500 can be configured by SMS text messages and by using a computer with the software and interface cable provided.

Applications include authorised door access, controlling of automatic gates, car parking systems, re -setting or rebooting of computers, servers and routers.

Featured Product

PureLink - HCE III TX/RX: 4K HDR over HDBaseT Extension System w/ Control and Bi-Directional PoE

PureLink - HCE III TX/RX: 4K HDR over HDBaseT Extension System w/ Control and Bi-Directional PoE

The HCE III Tx/Rx HDBaseT™ extension system offers full HDMI 2.0 compliance supporting HDR (High Dynamic Range) and 4K@60Hz with 4:4:4 chroma sampling. Featuring PureLink's proprietary Pr©cis codec, a light compression technology, the HCE III can transport Ultra HD/4K, multi-channel audio, and High Dynamic Range (10 bits support) content over a single CATx cable. The HCE III provides HDMI extension up to 130 feet (40 meters) at Ultra HD/4K and up to 230 ft. (70 meters) at 1080p over category cable with embedded multi-channel audio, CEC pass-through, bi-directional RS-232 and IR control, and PoE - all with zero loss and zero noise. The HCE III Tx/Rx also supports Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio plus LCPM (up to 192 kHz). Additionally, the low profile "slim box" enclosure design make the HCE III ideal for limited space installation environments, such as behind flat panel displays and video walls.