Screen Innovations Announces Release of Reference Motorized II Projector Screen

Equipped with a new ESI quick and quiet motor, the Reference Motorized II screen makes motorized projection experience cooler than it has even been.

Austin, TX - April 28, 2010 - Screen Innovations (SI), the leader in projection screen technology, recently announced the release of the Reference Motorized II screen, the most elegant motorized projection screen available today. The Reference Motorized II features an all new Electronic Solutions Inc (ESI) high speed motor with motor noise of only 3db over average home's noise. One of the quickest motor speeds available today, you can quietly enjoy your home theater in less than 12 seconds!


The Reference Motorized II has eliminated the need for a flush mount chassis. Up until now, the industry standard has been selling a separate chassis to put the box in, which is both costly and impractical. With SI's new Reference Motorized II, the installer can either add flush mount plates at the bottom or add the décor plate for external installation. Pricing remains the same either way, while eliminating the need for a second box.

Controlling and installing the Reference Motorized II is as quick and easy as its motor. New electronic illuminated set -top buttons eliminate the hassle of allen screws, making installation a snap. The Reference Motorized II's new in -roller controls now "include" a 12 volt trigger, IR remote, and wall switch. RS232 & RF are available and are compatible with AMX, Crestron, Lutron and more. SI's motorized projection screen mounting brackets give installers the flexibility to mount on -wall, on -ceiling, in -ceiling -top -mount, and in -ceiling -side -mount. This new design allows for incremental adjustment both vertically and horizontally after the screen is mounted.

"Reference Motorized II is the latest example of how SI is changing the projection screen landscape," said Ryan Gustafson, president of Screen Innovations. "With the Reference Motorized II, we eliminated the need for a flush mount chassis and built the controls into the motor making it the fastest, quietest, and easiest motorized screen to install."

The Reference Motorized II is available with many of SI's HD screen materials, including the Gamma HD, Solar HD, Lunar HD, Gamma Maestro HD, and Lunar Maestro HD. Custom screen sizes are available in one inch increments and the unit comes standard with a 24 inch black screen drop (up to six feet with custom orders).

The Reference Motorized II will be released May 1st.

For more information about Screen Innovations, visit www.screeninnovations.com

Featured Product

PureLink - HCE III TX/RX: 4K HDR over HDBaseT Extension System w/ Control and Bi-Directional PoE

PureLink - HCE III TX/RX: 4K HDR over HDBaseT Extension System w/ Control and Bi-Directional PoE

The HCE III Tx/Rx HDBaseTâ„¢ extension system offers full HDMI 2.0 compliance supporting HDR (High Dynamic Range) and 4K@60Hz with 4:4:4 chroma sampling. Featuring PureLink's proprietary Pr©cis codec, a light compression technology, the HCE III can transport Ultra HD/4K, multi-channel audio, and High Dynamic Range (10 bits support) content over a single CATx cable. The HCE III provides HDMI extension up to 130 feet (40 meters) at Ultra HD/4K and up to 230 ft. (70 meters) at 1080p over category cable with embedded multi-channel audio, CEC pass-through, bi-directional RS-232 and IR control, and PoE - all with zero loss and zero noise. The HCE III Tx/Rx also supports Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio plus LCPM (up to 192 kHz). Additionally, the low profile "slim box" enclosure design make the HCE III ideal for limited space installation environments, such as behind flat panel displays and video walls.