Control of AMX from iPad.

New version of iRidium program for AMX and iPad / iPhone / iPod is available on AppStore and free for installers!

We introduce you a new version of iRidium program for AMX and iPad / iPhone / iPod. The new version is available on AppStore!


Remind you that iRidium transforms iPad / iPhone / iPod into the "native" AMX system control panel.

iRidium allows you to operate such subsystems as: lighting, heating, climate control, video -surveillance, security, audio -video, multimedia -server.

Also iRidium allows you to use an existing design created for AMX panels. This design will be loaded on iPad / iPhone / iPod and you can immediately operate your home automation system after that.

At the same time all AMX panels functions and capabilities (such as dynamic elements, animation, translucency, sound, video output) are available. In addition, all Multi -touch screen iPad pluses are added!

Thus, if you already have an AMX panel for your home automation system controlling, it would take no more than 10 minutes to turn iPad into a similar panel. At the same time functional and interface of the new panel will be the same as an AMX panel has.
AMX system is controlled via Wi -Fi, 3G, GPRS.
Capabilities of a new version iRidium for AMX and iPad / iPhone / iPod:
- Support of XBMC media -server
- Support of video in JPEG, MJPEG formats
- Support of graphical interfaces, dynamic control elements, animation, translucency
- Support of additional equipment operating (Kramer, GlobalCache, KeyDigital, Extron, IRTrans, etc.)

Documentation and instructions for iRidium's setting are already available. Now you can install iRidium much easier.

At the present time, a free iRidium version for testing and work demonstration are available for installers.

Featured Product

PureLink - HCE III TX/RX: 4K HDR over HDBaseT Extension System w/ Control and Bi-Directional PoE

PureLink - HCE III TX/RX: 4K HDR over HDBaseT Extension System w/ Control and Bi-Directional PoE

The HCE III Tx/Rx HDBaseT™ extension system offers full HDMI 2.0 compliance supporting HDR (High Dynamic Range) and 4K@60Hz with 4:4:4 chroma sampling. Featuring PureLink's proprietary Prcis codec, a light compression technology, the HCE III can transport Ultra HD/4K, multi-channel audio, and High Dynamic Range (10 bits support) content over a single CATx cable. The HCE III provides HDMI extension up to 130 feet (40 meters) at Ultra HD/4K and up to 230 ft. (70 meters) at 1080p over category cable with embedded multi-channel audio, CEC pass-through, bi-directional RS-232 and IR control, and PoE - all with zero loss and zero noise. The HCE III Tx/Rx also supports Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio plus LCPM (up to 192 kHz). Additionally, the low profile "slim box" enclosure design make the HCE III ideal for limited space installation environments, such as behind flat panel displays and video walls.