XANTECH NOW SHIPPING ITS CWTC10 COMMERCIAL WIRELESS TOUCH CONTROLLER

- Designed to complement Xantech's new WIC1200 Web Intelligent Controller, the CWTC10 provides a full 10.4" wireless control panel perfect for conference rooms, the hotel/hospitality industry, athletic facilities and more -

SYLMAR, CA, March 1, 2010 - Xantech Corporation, a leader in the field of audio/video remote control and distribution for 40 years, is now shipping the 10.4" WiFi CWTC10 Commercial Wireless Touch Controller, following its unveiling and overwhelming positive industry response at ISE 2010. Running Microsoft Windows CE in Kiosk Mode, the CWTC10 provides complete PC power with a full -color 800x600 control panel interface. Xantech's latest addition to its line of advanced touch panel controllers, it is an ideal complement to Xantech's new WIC1200 Web Intelligent Controller. The CWTC10 provides a full 10.4" wireless control panel (4 -Wire Resistive Touchscreen), perfect for a variety of applications, including conference rooms, hotels, athletic facilities and much more.


Although the CWTC10 is compatible with a number of third party products, when used with Xantech's WIC1200, the CWTC10 is the ideal user interface for controlling A/V teleconferencing systems, with a large, but not overbearing, easy -to -use display. Since it runs on Windows CE and offers full Web capability, along with Macromedia Flash Lite 3.1, the CWTC10 is the perfect platform for utilizing any Flash Web -enabled control page, which can be served using the WIC1200 or any Web server on the network.

The CWTC10 Commercial Wireless Touch Controller features include:

• 32 Bit 600 MHz MIPS Processor
• 256 MB NAND FLASH
• 1 MB NOR Boot FLASH
• 128 MB 533 DDR2 DRAM
• 802.11 b/g/n
• MPEG2/4 H.264 D1 Hardware decoder
• 2 USB 2.0 Hosts
• SD for memory expansion
• 2.1 mm 19 -volt power connector
• 10/100 LAN Auto MDX

Made of durable water -resistant polymer, the CWTC10 has a built -in kickstand for stand -alone/table -top settings. The unit comes with a lithium ion battery and the compatible charging base, along with a 19 -volt power supply.

The CWTC10 Commercial Wireless Touch Controller is now available at a U.S. MSRP of $2,400.00. For more information on Xantech's full range of commercial products, please visit www.xantechcommercial.com.

Featured Product

PureLink - HCE III TX/RX: 4K HDR over HDBaseT Extension System w/ Control and Bi-Directional PoE

PureLink - HCE III TX/RX: 4K HDR over HDBaseT Extension System w/ Control and Bi-Directional PoE

The HCE III Tx/Rx HDBaseT™ extension system offers full HDMI 2.0 compliance supporting HDR (High Dynamic Range) and 4K@60Hz with 4:4:4 chroma sampling. Featuring PureLink's proprietary Pr©cis codec, a light compression technology, the HCE III can transport Ultra HD/4K, multi-channel audio, and High Dynamic Range (10 bits support) content over a single CATx cable. The HCE III provides HDMI extension up to 130 feet (40 meters) at Ultra HD/4K and up to 230 ft. (70 meters) at 1080p over category cable with embedded multi-channel audio, CEC pass-through, bi-directional RS-232 and IR control, and PoE - all with zero loss and zero noise. The HCE III Tx/Rx also supports Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio plus LCPM (up to 192 kHz). Additionally, the low profile "slim box" enclosure design make the HCE III ideal for limited space installation environments, such as behind flat panel displays and video walls.