Velodyne's SC -602 Amplifier Controls Two Subwoofers

The SC-602 dual-mono amplifier controls up to two SC-600 Series subwoofers.

Morgan Hill, CA (February 4, 2010) - The SC -602 dual -mono amplifier, available from Velodyne Acoustics, controls up to two SC -600 Series in -wall, in -floor or in -ceiling subwoofers. The two -unit high, rack -mount SC -602 is the newest addition to the SC -600 Series which includes the SC -600 IW (In -Wall) and SC -600 IF/IC (In -Floor/In -Ceiling) subwoofers and the single -sub SC -600 amplifier. The SC -600 Series are affordable, easy -to -use subwoofer systems designed for the custom installation market.


Using two Class D amplifiers with 400 watts peak power each and 200 watts RMS each, the SC -602 comes complete with a one -touch, five -band Auto -EQ room bass correction system and IR remote with customized listening presets for movies, R&B/rock, jazz/classical and games. Subwoofer volume, phase and night mode can also be adjusted via the remote control. The SC -602 amplifier is easily connected to one or two subwoofers with conventional speaker wire and includes RS -232 control (Crestron certified), 12V trigger and an IR repeater jack.

"With the SC -602, a custom installer can now specify a dual -sub solution for $1699," said Doug Smith, national sales director for Velodyne. "Set up is as easy as cut, plug and play using the SC -602 with one or two SC -600 IWs, and the use of dual subs dramatically improves the bass response in any room."

The companion SC -600 IW subwoofer installs easily, as a single or in pairs, in either new construction or retrofit applications due to its one -piece sealed enclosure. A unique triple vector design, with two active 6.5" long -throw drivers and two custom passive radiators firing at 45 degree angles, maximizes excursion within the wall cavity and reduces wall vibration by 50%.

One or two SC -600 IF/IC subwoofers can be concealed in the floor, ceiling, riser, closet or other enclosures. The 12" driver mounted in a slot -loaded, bass -reflex cabinet minimizes distortion and maximizes both bass output and impact.

About Velodyne
Velodyne Acoustics, Inc., founded in 1983, is universally recognized as the leading manufacturer of high -performance, low distortion powered subwoofers at all price levels. Headquartered in Silicon Valley, California, the company's technically innovative audio products are available through a select group of authorized dealers, custom installers, and distributors worldwide. For more information visit www.velodyne.com.

Featured Product

Platinum Tools New ezEX-RJ45 Termination System for larger CAT6/6A cables

Platinum Tools New ezEX-RJ45 Termination System for larger CAT6/6A cables

The new EXOtm Crimp Frame and next generation (globally patented) ezEX-RJ45® Connectors provides the solution for terminating larger diameter Cat6/6A twisted-pair cables. Made in USA. • Conductor sizes up to .048", • Die sets for EZ-RJ45 & ezEX-RJ45 connectors • Feed-through EZ-RJ45 design verifies EIA568A/B wiring • One-step to crimp and flush cut/trim EZ-RJ45 conductors ***See us at ISC WEST #6035***