DPL Labs President Jeff Boccaccio to Conduct Multiple HDMI Rev. 1.4 Seminars at Consumer Electronics Show

CES Attendees Can Learn All About HDMI's Latest & Still Evolving 1.4 Specification

ORMOND BEACH, FL - December 29, 2009 - DPL Laboratories, Inc. (DPL Labs) announced today that company President Jeffrey Boccaccio will be conducting a series of seminars on HDMI™ technologies at next week's Consumer Electronics Show in Las Vegas, Nevada. These seminars are being conducted in conjunction with Ethereal Home Theater and NextGen - both of whom are participating member companies in the Digital Performance Level Certification Program (the DPL Program). The company has scheduled sessions over the first three days of the four days of the show, allowing CES attendees multiple opportunities to find a session that fits into a time slot convenient for their schedule.


Boccaccio's presentation will focus on the key fundamentals of the HDMI™ interface that every dealer and installer should know. Also, this all -new presentation will cover important elements of HDMI™ specification revision 1.4, the latest version of the HDMI™ interface that was announced in late 2009 that continues to evolve. Given the importance of HDMI™, the digital interconnect solution offering the highest quality performance, Boccaccio's seminar is a "must -see" for any dealer or installer involved in high quality, high definition A/V systems and installations.


The schedule of presentations is as shown in the following table:



Thurs, Jan. 7 from 2:00 ~ 3:30PM
Ethereal Home Theater, LVCC South 1, Booth #21402


Fri., Jan. 8 from 2:00 ~ 3:30PM
NextGen, LVCC South 1, Booth #20844


Sat., Jan. 9 from 2:00 ~ 3:30PM
Ethereal Home Theater, LVCC South 1, Booth #21402



Space is limited, so please be sure to arrive early for each of these sessions. For more information on DPL Labs, see www.dplrating.org.


# # #



ABOUT DPL LABORATORIES, INC.

DPL Laboratories, Inc. of Ormond Beach, FL (DPL Labs) administers the Digital Performance Level Certification Program (the DPL Program) in which their independent laboratory tests advanced digital connectivity solutions, such as HDMI™ cables, against an objective performance standard to determine an accurate ranking based on actual data -backed results. All products are ranked on a simple numeric scale that ranges from "1" to "5" representing "good" to "best" performance. Consumers can then use this ranking to assist them in purchasing the correct product for their application. Look for the DPL performance certification seal as your assurance of quality product performance.


Brands participating in the DPL Program include: Acoustic Research, Binary Cables by SnapAV, Direct Connect, Ethereal, Honeywell, JIB Enterprise Co., NextGen, Phoenix Gold, SR Components, Inc., and Signature Wire Corp. To see a continuously updated list of participating manufacturers, or to get more details on this program, see online at: http://www.dplrating.org or call 386/615 -2324.


PRESS CONTACT

Ted Green, tedg@stratecongroup.com
The Stratecon Group, Inc.
732.321.4181

Featured Product

ELK Products -C1M1 Dual-Path Alarm Communicators with Remote Services

ELK Products -C1M1 Dual-Path Alarm Communicators with Remote Services

C1M1 offers a truly significant reduction in transmission time in comparison to other communicators that rely on dial capture or data bus decoding. This can result in quicker response time to emergency situations which could save lives and assets. By providing both IP and cellular pathways, C1M1 provides the reliability installers are looking for in an alarm communicator. C1M1 eliminates port forwarding and extra fees for remote access. Installers can remotely upload/download programming changes to M1 controls over IP or cellular using ElkRP2. Consumers can control the M1 remotely via the free ElkLink mobile app and web portal, as well as eKeypad and M1 Touch Pro apps. Other IP-based software and interface partners can connect to the M1 control over the local network through C1M1. C1M1 also provides email/text notifications for arm, disarm, and alarm events. ELK-C1M14GSM supports GSM (AT&T/T-Mobile) networks and ELK-C1M1CDMA supports CDMA (Verizon) networks.